Advertisement
Not pictured
Mounting material
Hexagonal spanner (3 mm and 4 mm).
Mounting material (ceiling)
•
1 × screw (25 × 4.5 mm)
•
1 × washer
•
1 × dowel
Fixing material (floor)
•
2 × screws (50 × 5 mm)
•
2 × washers
•
2 × dowel
Attention!
•
After assembly, check that the bike rack is firmly seated between the floor and the ceiling by
shaking it slightly! Check all parts of the bike rack before each use! Loose connections must be
tightened and defective parts replaced to avoid damage to the product and to ensure proper
functioning!
•
The bicycle stand must not be used by children, but only by adults who can easily lift the weight
of the bicycles!
Attention!
•
Only mount the bicycle stand at a 90° angle to the floor and ceiling and only on a firm and level
surface!
•
Improper or incorrect use may result in danger to persons or damage to the bicycles, the bicycle
stand, or other objects in the vicinity.
•
Do not hang onto the bike mount and do not try to climb on it!
Assembly
Step 1
Determine a place where you can place the bicycle stand on a firm and level surface.
Notice!
Before assembling the bicycle stand, lay out all the parts supplied and check them for completeness
using these instructions.
Step 2 (optional)
Fix the ceiling plate (2) to the ceiling with the supplied screw, washer, and dowel.
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Item 62831
Page 4
07 2021-1
Advertisement
