Table of Contents
Advertisement
Please Note :
1.
If you want pure digital stream for your receiver to decode, you must also configure
the TV's OSD Sound- >Digital Audio Out function. Make sure the option is on Bit
Stream.
2.
If your receiver is making static noises when receiving Bit
3.
Stream, you must use the PCM option instead.
4.
Refer to the receiver's manual to make sure the receiver is configured to receive sig-
nals correctly from the TV.
Connecting to a PC
Connecting with DVI Digital (Best Option)
1. Make sure the power of the TV and your receiver is turned off.
2. Obtain a HDMI to DVI conversion cable; connect the DVI side of the conversion
cable to the DVI output of your PC, and the HDMI side of the conversion cable to
Owner's Manual -
Model
NXG-4970-DS | C-NXG-4970-DS
Located on Back of TV
TV I
& C
nsTallaTIon
onneCTIons
|
23
Advertisement
Table of Contents
Need help?
Do you have a question about the NXG-4970-DS and is the answer not in the manual?
Questions and answers