Sony KDF-50E2000 Operating Instructions Manual page 31

Connecting to the TV (rear)
Digital
satellite
receiver
DVD
player
PC
DVD player
with component
output
Hi-Fi
Video game equipment
DVD player
Decoder
To connect
PC D
Digital satellite
receiver or DVD
player E, F
DVD player with
component output
G
Video game
equipment, DVD
(SMARTLINK)
player or decoder
H
DVD recorder or
DVD
VCR that supports
recorder
SmartLink I
VCR
Decoder
Hi-Fi audio
equipment J
Do this
Connect to the PC /
sockets. It is recommended to use
a PC cable with ferrites.
Connect to the HDMI IN 6 socket
or to the HDMI IN 7 socket if the
equipment has a HDMI socket.
The digital video and audio signals
are input from the equipment. If
the equipment has a DVI socket,
connect the DVI socket to the
HDMI IN 7 socket through a DVI -
HDMI adaptor interface (not
supplied), and connect the
equipment's audio out sockets to
the audio in HDMI IN 7 sockets.
Notes
• The HDMI sockets only support
the following Video inputs: 480i,
480p, 576i, 576p, 720p and
1080i. To connect a PC, please
use the PC input socket.
• Use HDMI certified cable with
HDMI logo.
Connect to the component sockets
and the audio sockets /
Connect to the scart socket
1. When you connect the
decoder, the scrambled signal from
the TV tuner is output to the
decoder, then the unscrambled
signal is output from the decoder.
Connect to the scart socket
2. SmartLink is a direct link
between the TV and a VCR/DVD
recorder.
Connect to the audio output
sockets to listen to the sound
from the TV on Hi-Fi audio
equipment.
3.
/
/
31
GB