Table of Contents
Advertisement
Steps
1. Use your fingertips to carefully spread apart the securing-clips on each end of the memory-module slot.
2. Grasp the memory module near the securing clip, and then gently ease the memory module out of the memory-module slot.
NOTE:
Grasp the memory module near the securing clip, and then gently ease the memory module out of the memory-
module slot.
NOTE:
If the memory module is difficult to remove, gently ease the memory module back and forth to remove it from
the slot.
Installing the memory modules
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the memory modules and provides a visual representation of the installation
procedure.
44
Removing and installing components
Advertisement
Table of Contents
Need help?
Do you have a question about the OptiPlex 7090 Small Form Factor and is the answer not in the manual?