Table of Contents
Advertisement
Steps
1. Align the graphics card with the PCIe x16 card slot on the system board.
2. Using the alignment post, connect the card in the connector and press down firmly. Ensure that the card is firmly seated.
3. Close the expansion-card door, and press until it clicks into place.
Next steps
1. Install the
side
cover.
2. Follow the procedure in
Coin-cell battery
Removing the coin-cell battery
Prerequisites
1. Follow the procedure in
2. Remove the
side
cover.
after working inside your
before working inside your
computer.
computer.
Removing and installing components
41
Advertisement
Table of Contents
Need help?
Do you have a question about the OptiPlex 7090 Small Form Factor and is the answer not in the manual?