Weber Spirit E-225 GBS Owner's Manual page 10

Inside Cabinet Installation
You will need: cylinder brackets (A).
1) Open the barbecue cabinet. The cylinder brackets
snap into the mounting holes in the bottom panel as
shown in the illustration (B). Insert cylinder bracket
tabs into rectangular slots. Secure brackets in
place by pivoting them down to lock centre tab in
place.
2) Lift and place the cylinder between the cylinder
brackets (C) on the bottom panel. The base of the
cylinder must fit between the cylinder brackets.
3) Turn the cylinder so the valve opening faces the
front of the barbecue.
4) Connect the regulator to the LPG cylinder. Refer to
"CONNECTING THE REGULATOR."
Maximum LPG cylinder
capacity INSIDE cabinet is
8 kg.
The length of hose must not
exceed 1.5 metres.
10