Table of Contents
Advertisement
15.2 Media Specific Adjustments
The media specific adjustments are for customers who want to precisely adjust the
image quality per paper type that is registered in the machine.
The following settings can be manually adjusted through the Settings Editor >
Media > select a registered media type > Registration icon. The Settings Editor can
only be accessed via a Web browser using the IP address of the Océ VarioPrint
135.
The IP address of the Océ VarioPrint 135 is found on the machine's operator panel
through System > Local key operator settings > Connectivity > TCP/IP address.
The table below describes the Edit media registration settings and each setting's
description.
Setting
X image shift front (0.01 inches)
X image shift back (0.01 inches)
Z image shift front (0.01 inches)
Z image shift back (0.01 inches)
X offset (0.01 inches)
Z offset (0.01 inches)
X elongation front (0.1 ‰)
X elongation back (0.1 ‰)
S adjust (0.01 inches)
Trapezoid (0.01 inches)
Diamond shape adjust (0.01
inches)
Version 7
Océ VarioPrint 135 Customer Expectations Document
Description
Make a fine adjustment to enable printing with the correct
alignment of the image from the leading edge of the paper
in the feed direction on the front side.
(From ±500 mm in 0.1 mm increments)
Make a fine adjustment to enable printing with the correct
alignment of the image from the leading edge of the paper
in the feed direction on the back side.
(From ±500 mm in 0.1 mm increments)
Make a fine adjustment to enable printing with the correct
alignment of the image from the side edge of the paper
perpendicular to the feed direction on the front side.
(From ±500 mm in 0.1 mm increments)
Make a fine adjustment to enable printing with the correct
alignment of the image from the side edge of the paper
perpendicular to the feed direction on the back side.
(From ±500 mm in 0.1 mm increments)
Make a fine adjustment to the margin of the image from
the leading edge of the paper in the feed direction.
(From ±25 mm in 0.1 mm increments)
Make a fine adjustment to the margin of the image from
the side edge of the paper perpendicular to the feed
direction.
(From ±25 mm in 0.1 mm increments)
Make a fine adjustment to the image size from the feed
direction on the front side.
(From ±250% in 0.01% increments)
Make a fine adjustment to the image size from the feed
direction on the back side.
(From ±250% in 0.01% increments)
Make a fine adjustment to the image to straighten out a
skewed image.
(From ±25 mm in 0.1 mm increments)
Make a fine adjustment to the image to straighten out a
trapezoidal image.
(From ±25 mm in 0.1 mm increments)
Make a fine adjustment to the image to straighten out a
diamond-shaped image.
(From ±25 mm in 0.1 mm increments)
Page 48
Advertisement
Table of Contents
