Sony BRAVIA KDL-46V3000 Operating Instructions Manual page 19

Sockets
A HDMI IN 4 or 5
J HDMI IN 7
B PC
/
C
/ 3
D DIGITAL OUT
(OPTICAL)
E
F
/ 1
G
/ 2
H Headphones
I
6 or 6, and
6
K
CAM
(Conditional Access
Module)
Input symbol on
screen
AV4, AV5 or
AV7
PC
AV3
AV1 or AV1
AV2 or AV2
AV6 or AV6
Description
Connect to the HDMI IN 4, 5 or 7 socket if the equipment has a
HDMI socket. The digital video and audio signals are input
from the equipment. In addition, when HDMI control
compatible equipment is connected, communication with the
connected equipment is supported. Refer to page 30 to set up
this communication. If the equipment has a DVI socket,
connect the DVI socket to the HDMI IN 5 socket through a
DVI - HDMI adaptor interface (not supplied), and connect the
equipment's audio out sockets to the audio in the HDMI IN 5
sockets.
~
• The HDMI sockets only support the following video inputs: 480i,
480p, 576i, 576p, 720p, 1080i, 1080p and 1080/24p.
• Be sure to use only an HDMI cable that bears the HDMI logo.
• When connecting an audio system with HDMI socket, be sure to
also connect to the DIGITAL OUT socket.
Connect to the PC /
PC cable with ferrites.
Connect to the component video sockets and the audio sockets
/ 3.
Connect to the DIGITAL OUT socket using the Optical audio
cable.
Connect to the audio output
from the TV on Hi-Fi audio equipment.
Connect to the scart /
decoder, the scrambled signal from the TV tuner is output to
the decoder, then the unscrambled signal is output from the
decoder.
Connect to the scart /
link between the TV and a VCR/DVD recorder.
Connect to the i socket to listen to sound from the TV on
headphones.
Connect to the S video
6 socket, and the audio
noise, do not connect the camcorder to the video
and the S video 6 socket at the same time. If you connect
mono equipment, connect to the
To use pay TV services. For details, refer to the instruction
manual supplied with your CAM.
To use the CAM, remove the "dummy" card from the CAM
slot. Turn off the TV when inserting your CAM into the CAM
slot. When you do not use the CAM, we recommend that the
"dummy" card be inserted and kept in the CAM slot.
~
CAM is not supported in some countries/regions. Check with your
authorized dealer.
socket. It is recommended to use a
sockets to listen to the sound
1 socket. When you connect the
2 socket. SmartLink is a direct
6 socket or the composite video
6 sockets. To avoid picture
6 socket
6 L socket.
19
GB