Routine Care Of Vacuum Cleaner; Replacing Hepa Filter; Replacing Secondary Filter - Panasonic MC-UG787 Operating Instructions Manual

Optiflow™ series performance plus platinum upright vacuum with dirt sensor mc-ug787 operating manual
Table of Contents

Advertisement

ROUTINE CARE OF VACUUM CLEANER

Performing the following tasks will keep your new Panasonic vacuum cleaner
operating at peak performance levels and will ensure these high levels for years to
come. Check the BEFORE REQUESTING SERVICE section in this manual for
recommendations on performing some of these tasks to help solve various
problems that may occur.
Note: * Ensure filter is fully inserted.
** Filters cannot be cleaned and should be replaced at least once each
year.

Replacing HEPA Filter

HEPA Filter
Filtre HEPA
Filtro HEPA

Replacing Secondary Filter

- 30 -
Check filter when installing a new
dust bag.
If dirty, pull filter assembly from
bottom of dust compartment and
replace.
Place new filter in the filter support*,
air flow arrow side up, in dust
compartment, DO NOT CLEAN WITH
WATER**.
Secondary filter protects the motor.
Check filter assembly when installing
a new dust bag.
If dirty, pull filter from bottom of dust
compartment.
Place new filter, white side up, in
filter supporter*, DO NOT CLEAN
WITH WATER**.
Insert filter assembly tabs into the
front dust compartment slots then
push down into place*.

Advertisement

Table of Contents
loading

Table of Contents