Denon DCD-1600NE Owner's Manual page 6

Contents Connections
Features
High quality sound
High Bitrate and High Sampling with Advanced AL32 Processing
0
Plus
A high bitrate and high sampling has been achieved with Denon's
unique data interpolation algorithm. 16 bit audio signals are converted
to a high bitrate of 32 bit and 44.1 kHz sampling signals are up-sampled
by 16x to achieve smoother recreation of sound waves. Data
interpolation is also used, predicting interpolation points from a large
number of surrounding points to provide audio as close as possible to
the original sound. This elaborate restoration of data lost during digital
recording achieves fine, distortion-free rendering, accurate sound
localizing, rich bass and recreation that is faithful to the original sound.
DAC Master Clock Design for the Ideal Clock
0
To make full use of the properties of this unit's semiconductor, it was
important to use a highly accurate clock signal for the semiconductor's
operations. This model contains 2 oscillators, one for each frequency.
These oscillators are developed to dramatically decrease phase noise
caused by frequency displacement, achieving a more stable and more
accurate clock than ever before. The master clock is near the D/A
converter, reducing jittering to achieve faithful playback.
Front panel Display
Playback Settings
Advanced S.V.H. Mechanism & Direct Mechanical Ground
0
Construction
Advanced S.V.H. Mechanism, each individual part, including the disc
tray made of Xylon with 2 metal damper plates, is composed of different
metallic materials each designed for their specific purpose. This
produces outstanding vibration-damping properties, including damping
enhancement and diffusion of the resonance point due to the high
mass. The mechanism is designed with a low center of gravity, reducing
vibration from the inner area during disc rotation, and its structure is
also highly resistant to external vibration. It also employs Direct
Mechanical Ground Construction, which completely eliminates the
impact of internal and external vibration, for example by locating the
power transformer close to the foot. This prevents the transmission of
unwanted vibration as well as noise outflow.
6
Rear panel
Tips
Remote Index
Appendix