Denon DCD-1600NE Owner's Manual page 25

Contents Connections
Switching the display's brightness
The brightness of the display can be adjusted to one of four levels.
1
Press DIMMER.
0 The DIMMER button also controls the Denon's Integrated Amplifier PMA-1600NE,
so the PMA-1600NE can be operated simultaneously with this unit. When the two
units have different settings, press and hold in the button for lease 2 seconds to
reset them both to the default setting, then make the desired setting.
0 The display brightness is set to most brightly by default.
Front panel Display
Playback Settings
Switching the Pure Direct mode
When the Pure Direct mode is used, the display turns off and digital output
stops.
This reduces the source of noise that can adversely affect sound quality,
enabling high quality playback.
1
Press CD PURE DIRECT.
The display turned off, and Pure Direct playback begins.
0 You can also switch the Pure Direct mode by pressing PURE DIRECT on the main
unit.
NOTE
0 In the Pure Direct mode, DIMMER is not available for operation.
0 The display is only turned off during playback.
25
Rear panel
Tips
To turn off this mode, press CD PURE DIRECT again.
0
Remote Index
Appendix