Table of Contents
Advertisement
About this guide
This guide provides information on installing and servicing the IBM Anyplace Kiosk
and is organized as follows:
v Chapter 1, "Introducing the IBM Anyplace Kiosk," describes the features and
v Chapter 2, "Installing the IBM Anyplace Kiosk" provides the installation steps for
v Chapter 3, "Mounting the IBM Anyplace Kiosk to the wall" describes the
v Chapter 4, "Removing and replacing FRUs" provides removal and replacement
v Chapter 5, "Troubleshooting problems" describes steps for diagnosing minor
v Appendix A, "Field-replaceable units" describes the available FRU part numbers.
v Appendix C, "Notices" provides legal, emission, and country-specific information.
v Appendix D, "Safety information" provides safety information for all common
Throughout this guide, the term 4836 and IBM 4836 refer to the IBM Anyplace
Kiosk.
Who should read this guide
Personnel responsible for installing, maintaining, and using the IBM Anyplace Kiosk
should read this guide. Some chapters provide information that is intended for
trained, technical personnel.
Related publications
The following IBM publications, drivers, and service diskette information are
available from the IBM Retail Store Solutions Web site at:
www.ibm.com/solutions/retail/store/. From the store page, click Support.
v IBM Safety Information, GA27–4004
v IBM Anyplace Kiosk System Reference, Available only from the web.
System software, touch drivers, and diagnostics
You can obtain the drivers and diagnostic software for your Anyplace Kiosk from the
IBM Retail Store Solutions Web site:www.ibm.com/solutions/retail/store/ (from the
store page, click on Support).
© Copyright IBM Corp. 2005
available options for the 4836.
the 4836.
procedures for mounting the 4836 to the wall.
procedures for the field-replaceable parts.
problems.
languages.
ix
Advertisement
Table of Contents
