Using Your Vacuum - Bissell SURFACESENSE PET 2817 Series Manual

Using Your Vacuum

For additional ways to use your vacuum's features, check out support.BISSELL.com.
1.
Turn the power switch ON.
Brush roll switch is on AUTO
to allow vacuum to sense
floor type.
Optional: To manually turn off
the brush roll, flip switch up.
WARNING
6 BISSELL.com
2.
Step gently on base and pull
the handle back to recline.
Note: The brush roll
automatically shuts off when
vacuum is locked in upright
position. Recline to reactivate.
Do not plug in your vacuum until you are familiar with all instructions and operating procedures.
3.
Use the suction control
slider to change settings
between plush carpet and
low carpet/bare floor for
easy multi-surface cleaning.