[System Selector]; Srgb-Compliant Video - Panasonic PT-RZ31К Operating Instructions Manual

[NATIVE]
[ITU-709]
[DCI-P3 emu.]
[ITU-2020 emu.]
Note
f DCI-P3 is the specifications of the digital cinema color region defined by the Digital Cinema Initiatives (DCI).

[SYSTEM SELECTOR]

The projector will automatically detect the input signal, but you can set the system method manually when an
unstable signal is input. Set the system method matching the input signal.
1) Press as to select [SYSTEM SELECTOR].
2) Press the <ENTER> button.
3) Press as to select a system format.
f Available system formats vary depending on the input signal.
Terminal
<R/P /VIDEO> terminal, <G/
R
Y>/<B/P /C> terminal
B
<RGB 1 IN> terminal, <RGB 2
IN> terminal
<DVI-D IN> terminal
<HDMI IN> terminal, <DIGITAL
LINK/LAN> terminal
4) Press the <ENTER> button.
Note
f For details of the types of video signals that can be used with the projector, refer to "List of compatible signals" (x page 243).
f This may not function properly for some connected external devices.
f The system method can be set using the following menu items for the SDI input.
g The [DISPLAY OPTION] menu → [SDI IN] → [SINGLE LINK SETTING] → [SDI1]/[SDI2] → [SYSTEM SELECTOR]
g The [DISPLAY OPTION] menu → [SDI IN] → [DUAL LINK SETTING] → [SYSTEM SELECTOR]

sRGB-compliant video

sRGB is an international standard (IEC61966-2-1) for color reproduction defined by IEC (International
Electrotechnical Commission).
Set according to the following steps to reproduce more faithful, sRGB compliant colors.
1) Set [COLOR MATCHING] to [OFF].
f Refer to [COLOR MATCHING] (x page 117).
2) Display the [PICTURE] menu.
f Refer to "[PICTURE] menu" (x page 90).
3) Press as to select [PICTURE MODE].
4) Press qw to set [NATURAL].
5) Press as to select [COLOR].
6) Press the <DEFAULT> button on the remote control to set the factory default setting.
Chapter 4 Settings — [PICTURE] menu
Displays the image with a color space unique to this projector.
Displays the image with a color space compliant with the ITU-R BT.709 standard.
Displays the image with a color space close to DCI-P3.
Displays the image with a color space close to the ITU-R BT.2020 standard.
Select [AUTO], [NTSC], [NTSC4.43], [PAL], [PAL-M], [PAL-N], [SECAM], or [PAL60].
Set it to [AUTO] normally. (Setting [AUTO] will automatically select [NTSC], [NTSC4.43], [PAL],
[PAL-M], [PAL-N], [SECAM], or [PAL60].)
Switch the setting to the signal method for the TV used.
480/60i, 576/50i, or 576/50p
signal
640 x 480/60 or 480/60p
signal
Other movie-based signals
480/60i, 576/50i, 480/60p, or
576/50p signal
Other movie-based signals
480/60i, 576/50i, 480/60p, or
576/50p signal
Other movie-based signals
System format
Select [RGB] or [YC C ].
B R
Select [640x480/60], [480/60p YC
Select [RGB] or [YP P ].
B R
Select [RGB] or [YC C ].
B R
Select [RGB] or [YP P ].
B R
Select [AUTO], [RGB], or [YC C
B
Select [AUTO], [RGB], or [YP P
B
C ], or [480/60p RGB].
B R
].
R
].
R
ENGLISH - 97