Gigabyte X570 Aorus Ultra User Manual page 30

Hide thumbs Also See for X570 Aorus Ultra:
Table of Contents

Advertisement

& IOMMU
(Note 1)
Enables or disables AMD IOMMU support. (Default: Auto)
& Extreme Memory Profile (X.M.P.)
Allows the BIOS to read the SPD data on XMP memory module(s) to enhance memory performance when
enabled.
Disables this function. (Default)
Disabled
Uses Profile 1 settings.
Profile1
Uses Profile 2 settings.
(Note 2)
Profile2
& System Memory Multiplier
Allows you to set the system memory multiplier. Auto sets memory multiplier according to memory SPD
data. (Default: Auto)
ƒ Advanced Memory Settings
& Memory Timing Mode
Manual allows the memory timing settings on the Memory Subtimings submenu to be configurable.
Options are: Auto (default), Manual.
& CLDO_VDDP Control
Allows you to determine whether to manually change the CLDO_VDDP voltage. Auto lets the BIOS
automatically configure this setting. (Default: Auto)
& CLDO_VDDP Voltage(mV)
Allows you to manually change the CLDO_VDDP voltage. This item is configurable only when CLDO_VDDP
Control is set to Manual.
ƒ SPD Info
Displays information on the installed memory.
ƒ Memory Subtimings
d S tandard Timing Control, Advanced Timing Control, CAD Bus Setup Timing, CAD Bus
Drive Strength, Data Bus Configuration
These sections provide memory timing settings. The respective timing setting screens are configurable
only when Memory Timing Mode is set to Manual. Note: Your system may become unstable or fail to boot
after you make changes on the memory timings. If this occurs, please reset the board to default values by
loading optimized defaults or clearing the CMOS values.
& CPU Vcore/Dynamic Vcore(DVID)/VCORE SOC/Dynamic VCORE SOC(DVID)/CPU VDD18/
CPU VDDP/PM_1VSOC/PM_1V8/DRAM Voltage (CH A/B)
These items allow you to adjust the CPU Vcore and memory voltages.
ƒ Advanced Voltage Settings
This submenu allows you to configure Load-Line Calibration level, over-voltage protection level, over-current
protection level, and PWM frequency.
(Note 1) This item is present only when you install a CPU that supports this feature.
(Note 2) This item is present only when you install a CPU and a memory module that support this feature.
(Note 2)
(Note 1)
(Note 1)
- 30 -

Advertisement

Table of Contents
loading

Table of Contents