Table of Contents
Advertisement
Light Source Information
This section will provided a better understanding of your projector's light source.
Light Source Hour
When the projector is being used, the duration (in hours) of light source usage is
automatically calculated by the built-in timer.
To obtain the light source hour information:
1. Press
Menu
to open the OSD Menu and go to:
>
Light Source Hours Information.
2. Press
Enter
and the
3. Press
Exit
to leave the menu.
Extending Light Source Life
To prolong light source life, you can adjust the following settings in the OSD Menu.
Setting Light Source Mode
Setting the projector in Eco, Dynamic Eco, or SuperEco+ mode reduces system
noise, power consumption, and extends the light sources operational life.
Light source
Mode
Normal
Eco
Dynamic Eco
Custom
To set the Light Source Mode, open the OSD Menu and go to: Advanced
Light Source Settings
Enter.
Setting Auto Power Off
This allows the projector to turn off automatically after a set period of time once no
input source is detected.
Open the OSD Menu and go to: POWER MANAGEMENT > Smart Energy >
Auto Power Off and press
Light Source Hours Information
Description
Provides full light source brightness.
Reduces light source power consumption by 20% and lowers
brightness, and decreases fan noise.
Reduces light source power consumption by up to 30% depending
on the content's brightness level.
Allows you to adjust the light source power to extend the light
source life and decreases the fan noise.
>
Light Source Mode and press
to disable or adjust the time.
/
Advanced
page will appear.
/
98
>
Light Source Settings
>
to select and press
Advertisement
Table of Contents
