Setting The White Balance - Canon PowerShot A10 User Manual

• If the LCD monitor is on, you can check
the results of the compensation by
viewing the image on the LCD monitor.
• A shot can be taken immediately after.
The menu will reappear after the shot,
allowing you to adjust the setting.
4
Press the SET button.
5
Take the shot.
If you wish to turn compensation off,
repeat this procedure and set the
compensation value to [0].
• The camera retains the compensation
setting even after power goes off.
• If using the camera in
mode, you cannot change the
compensation after taking the first shot.
(Stitch Assist)

Setting the White Balance

Setting the white balance to match the
dominant light source when shooting will
adjust the coloring of the image (excluding
images) to the correct settings for the
prevailing light conditions.
The camera sets the white
Auto
balance automatically.
Use when shooting outdoors
Daylight
in sunlight on a clear day.
Use when shooting outdoors
Cloudy under cloudy skies, in shade,
or at dusk.
Use when shooting under
Tungsten
tungsten lighting.
Use when shooting under
Fluorescent
fluorescent lighting.
Select this setting if you want
Black and
to shoot in black and white.
White
47