Canon PowerShot A10 User Manual page 95

2
Turn the camera's mode dial
to .
The LCD monitor displays in replay
mode. When the connection to the
computer is complete, the LCD monitor
turns off and the green indicator
comes on.
To disconnect the cable from the camera:
Hold the cable connector firmly at both sides
and pull it straight out.
• If you disconnect the USB cable while the
camera is on, the camera will automatically
turn off.
• If you leave the camera unused for
approximately 5 minutes while it is
connected the computer, the computer
screen displays a warning message. If you
do not take any action within the next
minute, the camera turns off. You can turn
the camera back on by pressing the main
switch.
For information about what to do after making
the connection, please refer the Software
Starter Guide .
93