Canon PowerShot A10 User Manual page 33

In and
You can use the DISPLAY button to switch
the LCD monitor display on and off.
The camera stores the LCD monitor on/off
setting in memory, and restores it when you
turn the camera on again. If the camera
displays the "Change the batteries" at time of
power-on, however, then the LCD monitor
may remain off the next time you turn on the
camera.
Set the flash to on or affix the camera to a
tripod when the upper indicator flashes
orange and the camera blur warning icon
( ) appears in the LCD monitor after the
metering preparations are complete.
Modes... In Mode...
• The LCD monitor always comes on when
you turn the mode dial to
• You can use the DISPLAY button to
switch the amount of information shown
on the display.
Single Image Replay
Standard Detailed
Index Replay (9 images)
Standard No display
.
No display
31