Canon PowerShot A100 User Manual page 52

Canon digital camera user guide powershot a200, powershot a100
Hide thumbs Also See for PowerShot A100:
Table of Contents

Advertisement

G Appendices G
Cause
Problem
The camera doesn't
Camera is in replaying mode.
shoot.
The flash is charging.
The CF card is full.
The CF card is not formatted correctly.
The batteries are
Batteries are not the right type.
consumed quickly.
102
Solution
Change to the Shooting mode. (See "Switching
Between Shooting / Replay (p. 28).)
Wait until the flash charges. You can press the
shutter button when the indicator glows a
steady orange.
Insert a new CF card.
Download images to your computer, then erase
them from the card to free up more space.
Format the CF card. (p. 66).
The card may be defective (its logical format
may be corrupted).
Contact Canon Customer Help Desk.
Use only unused AA-size alkaline batteries or
Canon AA-size NiMH batteries. (For the infor-
mation about alkaline batteries, see "Proper
Battery Handling" (p. 21).)
Cause
Problem
The batteries are
Battery capacity drops due to low
consumed quickly.
ambient temperatures.
Battery terminals are dirty.
The batteries have not been used for
over a year.
If using rechargeable batteries: The bat-
teries have lost their effectiveness.
If using rechargeable
Batteries were placed in the charger in
batteries: Batteries do
the wrong direction.
not charge.
Poor electrical contact, between
batteries and the charger.
Battery terminals are dirty.
The batteries have lost their effectiveness.
G Appendices G
Solution
If shooting in a cold area, keep the batteries
warm (by placing them in an inner pocket, etc.)
until ready to use them.
Wipe them well with a dry cloth before use.
If batteries are rechargeable: Performance should
return to normal after several charging cycles.
Replace both batteries with new ones.
Put batteries back into the charger in the
correct direction.
Wipe the battery terminals with a dry, clean cloth.
Be sure to set batteries firmly into the charger.
Be sure that the power cable is firmly
connected to the charger, and is firmly plugged
in to the electrical outlet.
Wipe them well with a dry cloth before charging.
Replace both batteries with new ones.
103

Advertisement

Table of Contents
loading

This manual is also suitable for:

Powershot a200

Table of Contents