Protecting Images; Erasing; Erasing Images Individually; Erasing All Images - Canon PowerShot A100 User Manual

G Replaying G

Protecting Images

Use the protect feature to protect important im-
ages from accidental erasure.
1
In the [Play] Menu, select
tect) and press the SET button.
See "Selecting Menus and Settings" (p. 36).
2
Press or button to select the
image you want to protect and press
the SET button.
The icon appears on the protected image.
Protected Icon
64
• To release the protection, press the SET
button again.
• You can make the selection of images
(Pro-
easier by toggling between single replay
and Index replay with the
3
Press the MENU button.
Please note that even protected images are
erased when a CF card is reformatted.

Erasing

Remember that erased images cannot be recovered.
Be careful to avoid accidental erasures.
This function will not erase protected images (p. 64).

Erasing Images Individually

1
Press the
button.
the image you want to erase and
press the
2
Press the
[Erase] and press the SET button.
Select [Cancel] instead of [Erase] and press
the SET button if you decide you do not want
to erase the image.

Erasing All Images

1
or button to select In the [Play] Menu, select
all) and press the SET button.
button. See "Selecting Menus and Settings" (p. 36).
2
Press
or button to select
and press the SET button.
Select [Cancel] instead of [OK] and press the
SET button if you decide you do not want to
erase the images.
(Erase
or button to select [OK]
65