Panasonic HDC-SDX1H Operating Instructions Manual page 91

∫ To watch images on a regular
TV (4:3) or when both sides of
the images do not appear on
the screen
Change the menu setting to display the
images correctly. (Check the TV setting.)
: [SETUP] # [TV ASPECT] # [4:3]
Example of images with a 16:9 aspect
ratio on a regular TV (4:3)
[TV ASPECT] setting
[16:9]
≥ If a wide-screen TV is connected, adjust
the aspect setting on the TV. (Refer to the
operating instructions of the TV for
details.)
Refer to the following support site for information about Panasonic TVs with an SD
card slot for playing back your pictures.
http://panasonic.net/
≥ For details on how to play back, please read the operating instructions for the TV.
∫ To display the on-screen
When the menu setting is changed, the
information displayed on the screen
(operation icon and time code etc.) can be
displayed/not displayed on the TV.
desired setting
[OFF]:
Not displayed
[SIMPLE]*:
Information partially displayed
[4:3]
[DETAIL]:
All information displayed
* This setting is only available in Recording
Mode.
≥ When the AV multi cable is connected to
this unit, the setup screen of the AV multi
destination is displayed on the screen of
this unit. Touch either [COMPONENT] or
[AV OUT] in accordance with the terminal
connecting to the TV. (l 92)
≥ If the HDMI mini cable and AV multi cable
are connected at the same time, output
will be prioritized in order of the HDMI mini
cable, AV multi cable.
≥ When viewing images recorded using
(640k480) on a [16:9] TV, the images may
be stretched horizontally. Adjust the
aspect setting on the TV. (Refer to the
operating instructions of the TV for
details.)
information on the TV
: [SETUP] # [EXT. DISPLAY] #
0.3
M
91
VQT2W55