Table of Contents
Advertisement
Problem
Although this unit is
correctly connected to
a TV, images cannot
be seen.
The images are
squeezed horizontally.
Scenes cannot be
deleted.
If the SD card is
inserted in this unit, it
is not recognized.
If the SD card is
inserted in another
device, it is not
recognized.
Color or brightness of
the image changes, or
you may see
horizontal bars in the
image.
The LCD monitor
flickers indoors.
Object seems to be
warped.
124
VQT2W55
≥ Please read the operating instructions of your TV and
select the channel that matches the input used for
the connection.
≥ Change the [TV ASPECT] setting to match the
aspect ratio of the TV. (l 91)
≥ Change the setting of the unit depending on the
cable connecting to the TV. (l 92)
≥ Release the protect setting. (l 87)
≥ Any scenes/still pictures where the thumbnails are
displayed as
still pictures are unnecessary, format the media to
erase the data. (l 44) Please be aware that if a
media is formatted then all the data recorded on the
media is erased and cannot be recovered. Back up
important data on a PC, disc etc.
≥ If the SD card is formatted on a PC, it may not be
recognized by this unit. Use this unit to format SD
cards. (l 44)
≥ Check that the device is compatible with the capacity
or type of SD card (SD Memory Card/SDHC Memory
Card/SDXC Memory Card) that you inserted. Refer
to the operating instructions of the device for details.
≥ Color or brightness of the image may change, or you
may see horizontal bars in the image when the object
is recorded under fluorescent light, mercury light or
sodium light, etc., but this is not a malfunction.
≥ In Motion Picture Recording Mode, record in
Intelligent Auto Mode or set the shutter speed to 1/60
in areas where the power supply frequency is 60 Hz,
or 1/100 in areas of 50 Hz.
≥ In Still Picture Recording Mode, this will not affect the
recorded image.
≥ Object seems to be warped slightly when the object
moves across the image very fast, but this is
because the unit is using MOS for the image sensor.
This is not a malfunction.
Check points
cannot be deleted. If the scenes/
Advertisement
Table of Contents
