Table of Contents
Advertisement
[QUICK POWER ON]
The unit is put into recording pause approx. 1 second when the unit is turned on with the
mode set to
or
≥ Depending on the recording conditions, start time may be longer than 1 second.
≥ In the Quick power on mode, the zoom magnification becomes 1k.
[QUICK START]
This unit is put into recording pause approx. 0.6 seconds after the LCD monitor is reopened.
≥ When in Quick start standby mode about 80% of the power used in Recording pause
mode is being consumed, so the recording time will be reduced.
≥ Start time will not be shortened if there is no SD card inserted.
≥ Change the mode to
1
Set
[QUICK START]
2
Close the LCD monitor while the mode is set
to
or
The status indicator A flashes green and the unit goes
into Quick start standby mode.
3
Open the LCD monitor.
The status indicator A lights red and the unit is
put into recording pause.
≥ Quick Start Standby Mode is canceled if
j about 5 minutes have elapsed
j mode is set to
≥ Depending on the recording conditions, time for Quick Start may be more than 0.6 seconds
slower in Still Picture Recording Mode.
≥ It may take some time for Automatic white balance to adjust.
≥ In the Quick Start Mode, the zoom magnification becomes 1k.
≥ If [ECONOMY] (l 41) is set to [5 MINUTES] and the unit automatically goes into Quick
Start Standby Mode, close the LCD monitor and then open it again.
≥ Turn the unit off using the power button.
42
VQT2W55
[OFF]/[ON]
.
[OFF]/[ON]
or
.
to
.
[ON]
.
Advertisement
Table of Contents
