JVC GR-DV3000A Service Manual page 136

SYMPTOM
7
The cassette will not load
properly.
8
The memory card will not
load properly.
9
In the 5-Second mode,
recording ends before
5 seconds have elapsed.
0
Snapshot mode cannot be
used.
!
The colour of Snapshot
looks strange.
@
The image taken using
Snapshot is too dark.
#
The image taken using
Snapshot is too bright.
$
Digital Zoom does not work.
%
Programme AE with special
effects and Fade/Wipe
Effects do not work.
^
The Black & White Fader
does not work.
&
During R.A.Edit, the
Dissolve function does not
work.
POSSIBLE CAUSES
• The cassette is in the wrong
position.
• The battery's charge is low.
• The memory card is in the wrong
position.
• The 5-Second mode is set to
"Anim." in the Menu Screen.
• The Squeeze mode is selected.
• The light source or the subject does
not include white. Or there are
various different light sources
behind the subject.
• The Sepia or Monotone mode is
activated.
• Shooting was performed under
backlit conditions.
• The subject is too bright.
• 10X optical zoom is selected.
• The VIDEO/MEMORY Switch is set
to "MEMORY".
• The Power Switch is set to "
• The Sepia or Monotone mode is
activated.
• The Sepia or Monotone mode of
Programme AE with special effects
is activated.
• The previously selected mode of
Programme AE with special effects
was changed after the last selected
scene for editing was registered.
CORRECTIVE ACTION
• Set it in the right position
( pg. 12).
• Install a fully charged battery
( pg. 8, 9).
• Set it in the right position
( pg. 13).
• Select "5S" in the Menu Screen
( pg. 35).
• Disengage the Squeeze mode
( pg. 30).
• Find a white subject and compose
your shot so that it also appears in
the frame (
• Turn off Sepia and Monotone
( pg. 38, 39).
• Press the BACKLIGHT Button
( pg. 40).
• Set "PROGRAM AE" to "SPOT-
LIGHT" in the Menu Screen
( pg. 38).
• Set "ZOOM" to "40X" or "300X" in
the Menu Screen (
• Set the VIDEO/MEMORY Switch to
"VIDEO" ( pg. 14, 22).
". • Set the Power Switch to "
( pg. 36, 38).
• Turn off Sepia and Monotone
( pg. 36, 38).
• Turn off Sepia or Monotone before
adding Dissolve to a scene
transition (
• Make sure you have selected the
mode of Programme AE with
special effects you want before
starting editing (
CONTINUED ON NEXT PAGE
75
EN
pg. 20, 21).
pg. 29).
"
pg. 38, 68).
pg. 38, 68).