Dear Customer, Thank you for choosing this quality product from ASKO. We hope it will meet your expectations and fulfi l your needs for many years to come. Scandinavian design combines clean lines, everyday functionality and high quality. These are key characteristics of all our products and the reason they are greatly appreciated throughout the world.
CONTENTS SAFETY INSTRUCTIONS TROUBLESHOOTING ADVICE AND TIPS BEFORE WASHING TECHNICAL INFORMATION USING YOUR WASHING MACHINE INSTALLATION SETTINGS BEFORE CONTACTING THE SERVICE DIVISION CARE AND CLEANING PROGRAMME CHART Translation of the original instructions.
SAFETY INSTRUCTIONS GENERAL • Read the operating instructions and keep them in a safe place. • Installation should be carried out by qualifi ed ASKO technicians. Activated child Inactivated child safety • The machine should only be used for washing items as...
ADVICE AND TIPS BEFORE WASHING Here are some tips that may help you before washing. WOOL These fabrics are labelled for either machine wash or for SORTING YOUR LAUNDRY hand wash. The machine’s Wool/hand wash programme is at least as gentle as washing by hand. Sort items according to: RAYON FIBRES AND SYNTHETIC •...
USING YOUR WASHING MACHINE Start Program selector Time remaining Stop Program Main power switch The detergent packaging will have recommendations ADD DETERGENT AND FABRIC for how much detergent you should use. The machine SOFTENER holds 10 kg of washing. If you only have a small amount of laundry in the machine, you can reduce the amount of detergent used.
Page 6
USING YOUR WASHING MACHINE PROGRAM SELECTION PROGRAM SELECTION The display shows the program name, the water NOTE! temperature and the spin speed. A few seconds after you start a program the washing machine will begin to fi ll with water from both the hot The washing machine has a number of preselected and the cold supplies.
SETTINGS HOW TO CHOOSE THE SETTINGS: 1 Turn off the machine using the main power switch. 2 Press and hold the Stop button and then press the main power switch. Then press the Stop button 5 times within 10 seconds. 3 Select the setting you want to change by turning the program selector.
CARE AND CLEANING Do as follows: CLEANING THE DETERGENT 1 Insert a screwdriver or the like into the hole on the COMPARTMENT agitator as illustrated and carefully pry to the left. Pull out the detergent compartment using the release button. Rinse the compartment and scrub it clean.
TROUBLESHOOTING THE WASHER DOOR WILL NOT OPEN WET WASHING STILL IN THE MACHINE • Check that the main power switch is on. A small load can occasionally cause an imbalance Unbalance (see “Unbalance”). Rearrange the load and • Has the power supply been cut off ? Check the house start the spin programme, or load more washing and fuses (circuit breakers).
TECHNICAL INFORMATION INFORMATION FOR TEST INSTITUTE Energy labelling Australian standard: AS/NZS 2040.1:2005 Washing program: Normal, 40 °C, 10 kg cotton Connection: Cold water 20 °C Test method for noise measurement: IEC-60704-2-4 Power requirement when machine turned off < 0,3 W Power requirement for Delayed Start <...
Page 11
TECHNICAL INFORMATION Loading procedure for standard test: When loading the machine for testing according to AS/NZS 2040:2005 it shall be loaded according to the table below. Garments are placed on top of each other in layers and the soil swatches should be placed inside the wash drum in the direction shown in the table, seen from above.
Page 12
TECHNICAL INFORMATION TECHNICAL DATA Height: 850mm Width: 595 mm Depth: 700 mm Weight: 82 kg Cylinder volume: 80 l Max. washing capacity: 10 kg Spin speed (rpm): 400-1400 Sound pressure level: The sound pressure level is below 70 dB(A) Rated power: See type plate.
INSTALLATION Water intake POSITIONING THE WASHING MACHINE At the factory, the machine is set for connecting to both The washing machine can be installed as a built-in or hot and cold water supplies. The machine can be set for freestanding unit. Place the machine on a fi rm surface cold water intake only.
BEFORE CONTACTING THE INSTALLATION SERVICE DIVISION BEFORE CONTACTING THE SERVICE CAUTION! DIVISION If this appliance is supplied from a cord extensions set or electrical portable outlet device, the cord Before you contact the service division, make sure that extension ser or electrical portable outlet device must you know its model designation (1), type designation (2) be positioned so that it is not subject to splashing or and serial number (3).
PROGRAMME CHART Program Max. load Spin Speed Consumption values (kg) Water consumption Energy consumption Program time (approx. (approx. liter) (approx. kWh) hrs and min.) Normal Wash, 60 °C 1400 1,49 3:37 Normal wash, 40 °C 1400 0,89 3:22 Heavy wash, 90 °C 1400 2,60 3:10...
You select a programme by turning the programme selector. The selected programme is shown in the display. CLOSE THE WASHER DOOR AND PRESS THE START BUTTON The time remaining is shown in hours and minutes. We reserve the right to make changes. www.asko.com WM80.C WMC84V en (12-13)
Need help?
Do you have a question about the WMC84V and is the answer not in the manual?
Questions and answers