Af Assist Lamp - Panasonic HDC-TM80K Owner's Manual

5
(When [SELECT] is selected in step 4)
Touch the range of pictures that will be stored.
≥ Previous (Next) page is displayed by touching
.
* Only select the picture for start point if only 1 picture is
to be stored.
≥ A confirmation message is displayed when [Enter] is
touched after selecting the start point and finish point.
Touch [YES] to store the pictures.
≥ If you turn off the unit or change the mode, this function is canceled.
≥ The maximum number of times you can record on a media is 15.
(In the case of SD cards it is the maximum number of recordable scenes per card.)
≥ Color balance and brightness on the screen may change with some light sources such as
fluorescent lamps.
≥ Image quality is different from ordinary still picture recording.

[AF ASSIST LAMP]

The Photo light is turned on to make it easier to focus when you are recording in dark places
where it is hard to focus.
≥ Switch to Manual Mode. (l 72)
: [PICTURE] # [AF ASSIST LAMP] # [AUTO]
MENU
≥ Set the Photo light to
≥ When switching to Intelligent Auto Mode, the setting is fixed to [AUTO] and cannot be
changed.
≥ It may not turn on when the LED light is very hot.
[SHTR SOUND]
You can add a shutter sound when recording still pictures.
: [PICTURE] # [SHTR SOUND] # desired setting
MENU
[OFF]: Cancel the setting.
: Volume low
: Volume high
≥ No shutter sound is emitted in Motion Picture Recording Mode.
([AUTO]) or ([OFF]). (l 57)
/
A Start point
B Finish point
*
71
VQT3J15