Troubleshooting - Panasonic HDC-TM80K Owner's Manual

High definition video camera
Table of Contents

Advertisement

Others

Troubleshooting

Problem
This unit cannot be
turned on.
This unit does not stay
on long enough.
Battery runs down
quickly.
This unit is turned off
automatically.
This unit cannot be
operated though it is
turned on.
This unit does not
operate normally.
"ERROR OCCURRED.
PLEASE TURN UNIT
OFF, THEN TURN ON
AGAIN." is displayed.
Problem
Remaining battery
indication is not
displayed properly.
128
VQT3J15
Power
≥ Charge the battery again to ensure it is sufficiently
charged. (l 21)
≥ In cold places, the battery using time becomes shorter.
≥ The battery has a limited life. If the operating time is still
too short even after the battery is fully charged, the
battery has worn out and needs to be replaced.
≥ If the unit turns off when you turn off the power to the TV
using the TV remote control, the VIERA Link is at work. If
you are not using the VIERA Link, set [VIERA Link] to
[OFF]. (l 96)
≥ When this unit is connected to a DVD burner to copy or
play back images (a disc is being accessed), the unit
turns off automatically if the USB Connection Cable is
removed.
≥ Remove the battery or AC adaptor, wait about 1 minute
and then reconnect the battery or AC adaptor. Then
about 1 minute later, turn on the unit again. (Conducting
the above operation while the media is being accessed
may damage the data on the media.)
≥ If normal operation is still not restored, detach the power
connected, and contact consumer support. (l 152, 153)
≥ The unit has automatically detected an error. Restart the
unit by turning the unit off and on.
≥ The unit will be turned off in about 1 minute if the unit is
not turned off and on.
≥ Repair is needed if it is repeatedly displayed, even if it is
restarted. Detach the power connected, contact
consumer support. (l 152, 153) Do not attempt to repair
the unit yourself.
Indication
≥ The remaining battery capacity indication is an
approximation.
If the remaining battery capacity indication is not
displayed correctly, fully charge the battery, discharge it
and then charge it again.
Check points
Check points

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents