Panasonic HDC-TM80K Owner's Manual page 44

[ECONOMY]
When about 5 minutes have passed without any operation, this unit automatically turns off to
save battery life.
≥ The Power Save function will not activate when:
j connected to AC adaptor
j using the USB cable for PC, DVD burner etc.
j PRE-REC is used
[QUICK POWER ON]
The unit is put into recording pause approx. 1 second when the unit is turned on with the
mode set to or
≥ Depending on the recording conditions, start time may be longer than 1 second.
≥ In the Quick power on mode, the zoom magnification becomes 1k.
[QUICK START]
This unit is put into recording pause approx. 0.6 seconds after the LCD monitor is reopened.
≥ When in Quick start standby mode about 80% of the power used in Recording pause
mode is being consumed, so the recording time will be reduced.
≥
Quick start will not work if there is no SD card inserted.
≥
/
Quick start will not work if the [SD CARD] is selected in the [MEDIA SELECT], even if there
is no SD card inserted.
≥ Change the mode to
1 Set [
QUICK START
2 Close the LCD monitor while the mode is
set to or
The status indicator A flashes green and the unit
goes into Quick start standby mode.
3 Open the LCD monitor.
The status indicator A lights red and the unit is put
into recording pause.
≥ Quick Start Standby Mode is canceled if
j about 5 minutes have elapsed
j mode is set to
≥ Depending on the recording conditions and menu settings, time for Quick start may be
longer than 0.6 seconds.
≥ It may take some time for Automatic white balance to adjust.
≥ In the Quick Start Mode, the zoom magnification becomes 1k.
44
VQT3J15
[OFF]/[5 MINUTES]
[OFF]/[ON]
.
[OFF]/[ON]
or .
] to [ ].
ON
.