Open Source Software Notice - LG WT6001H Series Owner's Manual

44

OPEN SOURCE SOFTWARE NOTICE

Wi-Fi Diagnosis
SMART DIAGNOSIS™ Through the Call
Center
1. Make sure that your appliance is connected to Wi-Fi by
checking the Wi-Fi icon on the upper right hand corner of
the display screen.
2. Touch the Smart ThinQ button on the lower part of the
Screen.
3. Touch the Smart Diagnosis button.
4. Touch the Wi-Fi Diagnosis button.
5. Touch the Start button, and then call the LG call center at:
(LG U.S.) 1-800-243-0000 (LG Canada) 1-888-542-2623.
6. The call center agent will be able to further assist you with
the diagnosis.
NOTE
y Smart Diagnosis is a troubleshooting feature designed
to assist, not replace, the traditional method of
troubleshooting through service calls. The effectiveness
of this feature depends upon various factors, including,
but not limited to, the reception of the cellular phone
being used for transmission, any external noise that
may be present during the transmission, and the
acoustics of the room where the machine is located.
Accordingly, LG does not guarantee that Smart
Diagnosis would accurately troubleshoot any given
issue.
OPEN SOURCE SOFTWARE
NOTICE
To obtain the source code under GPL, LGPL, MPL and other
open source licenses, that is contained in this product, please
visit http://opensource.lge.com.
In addition to the source code, all referred license terms,
warranty disclaimers and copyright notices are available for
download.
LG Electronics will also provide open source code to you
on a CD-ROM for a charge covering the cost of performing
such distribution (such as the cost of media, shipping and
handling) upon email request to opensource@lge.com. This
offer is valid for three (3) years from the date on which you
purchased the product.