Autoopen Dry; Installation And Connection; Scope Of Supply; Installing And Connecting The Appliance - Siemens SN23EC14CE User Manual

Hide thumbs Also See for SN23EC14CE:
Table of Contents

Advertisement

en Installation and connection

autoOpen Dry

The appliance door opens automatic-
ally during the drying phase. This en-
sures a particularly economical dry-
ing result.
For best drying results wait until the
end of programme before unloading
the tableware. The programme has
ended when the display shows
"0h:00m".
If the automatic door opening is de-
activated, energy consumption in-
creases and the drying phase is usu-
ally reduced.
→ "Overview of basic settings",
Page 33

Installation and connection

Installation and connec-
tion
To ensure proper operation, connect
Installation and connection
the appliance to the power and water
supply correctly. Observe the spe-
cified criteria and the installation in-
structions.

Scope of supply

After unpacking all parts, check for
any damage in transit and complete-
ness of the delivery.
If you have any complaints, contact
the dealer who sold you the appli-
ance or our Customer Service.
Note: The appliance was tested at
the factory to check it is in working
order. It is possible that water has left
marks on the appliance. These
marks will disappear after the first
wash cycle.
The delivery consists of the following:
¡ Dishwasher
¡ Operating instructions
¡ Installation Instructions
¡ Warranty
12
¡ Installation material
¡ Mains cable
¡ Quick reference guide
Installing and connecting the
appliance
You can position your built-under or
integrable appliance in a fitted kit-
chen between wooden and plastic
walls. If you subsequently install your
dishwasher as a free-standing appli-
ance, you must stop it from tipping
over, e.g. by screwing it to the wall or
installing it under a continuous work-
top that is securely connected to ad-
jacent cabinets.
"Follow the safety instructions."
1.
→ Page 4
"Follow the instructions for elec-
2.
trical connection." → Page 13
Check the Scope of supply and
3.
the condition of the appliance.
Consult the installation instructions
4.
for the installation dimensions re-
quired.
Make the appliance level using the
5.
height-adjustable feet.
Make sure that the appliance is
standing on the floor securely.
"Install the drainage connection."
6.
→ Page 12
"Install the drinking water connec-
7.
tion." → Page 13
Connect the appliance to the
8.
power supply.

Drainage connection

Connect your appliance to drainage
connection so dirty water is dis-
charged via the wash cycle.
Installing the drainage connection
Consult the installation instructions
1.
supplied for the steps required
here.

Advertisement

Table of Contents
loading

Table of Contents