Related Manuals for Siemens SN23EW14CE
Summary of Contents for Siemens SN23EW14CE
- Page 1 Dishwasher SN23EW14CE User manual Register your product on My Siemens and discover exclusive services and offers. siemens-home.bsh-group.com/welcome The future moving in. Siemens Home Appliances...
-
Page 2: Table Of Contents
Table of contents Safety .......... 4 Folding prongs ....... 21 General information...... 4 Basket heights........ 22 Intended use........ 4 Before using for the first time .. 22 Restriction on user group.... 4 Performing the initial configura- Safe installation ........ 4 tion.......... 22 Safe use ........... 6 Damaged appliance ...... 7 Water softening system.... - Page 3 Customer Service...... 55 Terminate programme.... 32 Product number (E-Nr.), produc- Switching off appliance .... 32 tion number (FD) and consecut- Basic settings........ 33 ive numbering (Z-Nr.) ..... 56 Overview of basic settings ..... 33 AQUA-STOP guarantee .... 56 Changing basic settings.... 35 Technical specifications.... 56 Home Connect ......
-
Page 4: Safety
en Safety Safety Observe the following safety instructions. General information ¡ Read this instruction manual carefully. ¡ Keep the instruction manual and the product information safe for future reference or for the next owner. ¡ Do not connect the appliance if it has been damaged in transit. Intended use Only use this appliance: ¡... - Page 5 Safety en WARNING ‒ Risk of electric shock! ¡ Incorrect installation is dangerous. ▶ Connect and operate the appliance only in accordance with the specifications on the rating plate. ▶ Always use the supplied power cable for the new appliance. ▶ Connect the appliance to a power supply with alternating current only via a properly installed socket with earthing.
-
Page 6: Safe Use
en Safety Safe use WARNING ‒ Risk of serious harm to health! Failure to comply with safety instructions and directions for use on packagings of detergent and rinse aid products may cause serious harm to health. ▶ Follow the safety instructions and directions for use on the packagings of detergent and rinse aid products. -
Page 7: Damaged Appliance
Safety en WARNING ‒ Risk of tipping! Overfilling the Baskets may cause the appliance to tip up. ▶ Never overfill the Baskets with free-standing appliances. WARNING ‒ Risk of electric shock! ¡ An ingress of moisture can cause an electric shock. ▶ Only use the appliance in enclosed spaces. ▶... -
Page 8: Risk To Children
en Safety ▶ If the power cord of this appliance is damaged, it must be replaced with a special connection cable, which is available from the manufacturer or his Customer Service. Risk to children WARNING ‒ Risk of suffocation! ¡ Children may put packaging material over their heads or wrap themselves up in it and suffocate. - Page 9 Safety en ▶ Keep children away from the appliance when open. The wa- ter in the interior of the dishwasher is not drinking water. It may contain residues of detergents and rinse aid. WARNING ‒ Risk of injury! Children may get their fingers caught in the slots of the tablet collecting tray and injure themselves.
-
Page 10: Preventing Material Damage
en Preventing material damage Only use the water hoses sup- ▶ Preventing material damage Preventing material dam- plied with the appliance or genu- ine spare hoses. Never re-use water hoses that ▶ have been used before. Preventing material damage Safe installation ¡... -
Page 11: Environmental Protection And Saving Energy
Environmental protection and saving energy en To prevent corrosion, do not use AquaSensor ▶ sponge cloths on dishwashers The AquaSensor is an optical meas- with a stainless steel front or uring device (light barrier) which rinse such cloths thoroughly measures the turbidity of the rinsing several times before using them water. -
Page 12: Installation And Connection
en Installation and connection installing it under a continuous work- Installation and connection Installation and connec- top that is securely connected to ad- jacent cabinets. tion "Follow the safety instructions." To ensure proper operation, connect Installation and connection → Page 4 the appliance to the power and water "Follow the instructions for elec- supply correctly. -
Page 13: Drinking Water Connection
Installation and connection en The connection data for the appli- Drinking water connection ance can be found on the rating Connect your appliance to a drinking plate. water connection. Check that the mains plug is inser- ted properly. Installing the drinking water connection Note ¡... -
Page 14: Familiarising Yourself With Your Appliance
en Familiarising yourself with your appliance Familiarising yourself with your appliance Familiarising yourself with your appliance Familiarising yourself with your appliance Appliance You can find an overview of the parts of your appliance here. Rating plate Rating plate with "E number and FD number" → Page 56. -
Page 15: Controls
Familiarising yourself with your appliance en "Detergent" → Page 26 is added to the detergent Detergent dispenser dispenser. "Bottom basket" → Page 20 Bottom basket Dispenser for special salt Add the special salt to the dispenser for special salt. → "Water softening system", Page 23 Lower spray arm The lower spray arm washes the tableware in the bot- tom basket. - Page 16 en Familiarising yourself with your appliance 3 4 5 6 "Switching on the appliance" → Page 31 ON/OFF button and reset button "Switching off the appliance" → Page 32 "Terminating the programme" → Page 32 "Programmes" → Page 17 Programme buttons Display The display shows information about the remain- ing running time or the basic settings.
-
Page 17: Programmes
Programmes en Programmes Programmes You can find an overview of the pro- runtime will change if the rinse aid Programmes grammes that can be selected here. system is switched off or rinse aid Different programmes, which can be needs to be added. found on the control panel of your The consumption values can be appliance, are available depending... -
Page 18: Information For Test Institutes
en Programmes Programme: Programme sequence Additional func- tions → "Additional Tableware: Time-optimised: ¡ Cleaning mixed table- ¡ Cleaning 65 °C functions", Speed 65° ware and cutlery. Page 19 ¡ Intermediate rinse Level of soiling: ¡ Final rinse 69 °C ¡ Removing common ¡ Drying household food remnants lightly dried-on. -
Page 19: Additional Functions
Additional functions en Press the right programme button. Additional func- → "Programmes", Page 17 tion Press the button for the relevant If you select this additional additional function. function, "automatic door → "Additional functions", Page 19 opening" → Page 33 in Press for 3 seconds. the "o02" setting is deactiv- a The selected programme and the ated. -
Page 20: Top Basket
en Features Raise or lower the basket evenly to Top basket the right level. Arrange cups, glasses and small → "Basket heights", Page 22 items of tableware in the top basket. Check that the basket is level on both sides. You can adjust the height of the top Slide the basket back in. -
Page 21: Cutlery Drawer
Features en Etagere Use the cutlery shelf and space un- derneath for small cups and glasses or for large items of cutlery, e.g. cooking spoons or serving cutlery. Cutlery drawer Arrange cutlery in the cutlery drawer. If you do not need the cutlery shelf, you can fold it up. -
Page 22: Basket Heights
en Before using for the first time Push the lever forwards and fold To use the prongs again, fold them down the prongs . back up. a The prongs audibly click into posi- tion. Basket heights Set the baskets at the right height. Appliance height 81.5 cm with cutlery drawer Setting Top basket... -
Page 23: Water Softening System
Water softening system en Tip: You can change these settings Water softening system Water softening system and other "Basic settings" → Page 33 at any time. Hard water leaves limescale on the Water softening system tableware as well as the washing tank and parts of the appliance may become blocked. -
Page 24: Special Salt
en Water softening system Press repeatedly until the Note: Only use special salt for right water hardness has been set. dishwashers. Do not use salt tablets. The value H04 is set at the factory. Do not use table salt. To save the settings, press Add the special salt to the dis- for 3 seconds. -
Page 25: Regeneration Of The Water Softening System
Rinse aid system en erally only be used up to a water Additional power consumption in 0.05 hardness of 26 °E without adding special salt. The consumption values specified ¡ The water hardness is 0 - 8 °E. are laboratory measurements determ- You do not need to use special ined in accordance with the currently salt. -
Page 26: Setting The Amount Of Rinse Aid
en Detergent Add rinse aid up to the max mark. To save the settings, press for 3 seconds. Switching the rinse aid sys- tem off If you find the rinse aid refill indicator irritating, e.g. when using combined detergents with a rinse aid compon- ent, you can switch the rinse aid sys- tem off. - Page 27 Detergent en starch and remove protein. Oxygen- Separate detergents based bleaching agents are generally Separate detergents are products used to remove coloured marks, e.g. that do not contain components other tea or ketchup. than detergent, e.g. powder deter- Note: Follow the manufacturer's in- gent or liquid detergent.
-
Page 28: Unsuitable Detergents
en Detergent ¡ The function of rinse aid is limited Unsuitable detergents with combined detergents. You will Do not use detergent which could generally get better results using cause damage to the appliance or rinse aid. present a risk to health. ¡... -
Page 29: Tableware
Tableware en Close the lid of the detergent dis- Damage to glass and table- penser. ware Avoid damage to glass and table- ware. Cause Recommendation The following table- Only put tableware in ware is not dish- the dishwasher if it is washer-safe: marked as dish- ¡... -
Page 30: Arrange Tableware
en Tableware To save resources, do not pre- Cause Recommendation rinse tableware under running wa- The water temperat- Select a programme ter. ure of the programme with lower temperat- Observe the following when arran- is too high. ures. ging tableware: After the programme –... -
Page 31: Removing Tableware
Basic operation en Removing tableware Setting a programme To adjust the wash cycle to the soil- WARNING ing level of the tableware, select a Risk of injury! suitable programme. Hot tableware can cause burns to the Press the right programme button. skin. -
Page 32: Starting The Programme
en Basic operation few minutes and then close it. This Starting the programme will help prevent excess pressure Press building up in the appliance and stop ▶ a The programme has ended when the appliance door bursting open. the display shows "0h:00m". Press ... -
Page 33: Basic Settings
Basic settings en Basic settings Basic settings You can configure the appliance to meet your needs. Basic settings Overview of basic settings The basic settings depend on the features of your appliance. Basic setting Display text Selection Description Water hardness H00 - H07 Set the water softening system to your water hardness. -
Page 34: Remote Start ", Page
en Basic settings Basic setting Display text Selection Description autoOpen Dry o00 - o02 Activate or deactivate automatic opening of the appliance door during the drying phase. If the function has been activated, the running time may increase. The following settings are possible: ¡... -
Page 35: Changing Basic Settings
Home Connect en ¡ Please also follow the instructions Changing basic settings in the Home Connect app. Press . Note: Please note the safety precau- To open the basic settings, press tions in this instruction manual and for 3 seconds. make sure that they are also ob- a The display shows Hxx. -
Page 36: Home Connect Settings
en Home Connect With the help of the Home Connect Press . ▶ App scan the QR code. If you open the appliance door, the function is automatically deactiv- ated. button lights up. Tip: To deactivate the function, press . Remote Diagnostics Follow the instructions in the Customer Service can use Remote Home Connect app. -
Page 37: Cleaning And Servicing
Dishwasher Care and Ma- ance to malfunction. To avoid such chine Cleaner for Dishwashers online faults and reduce odours, we recom- at https://www.siemens-home.bsh- mend cleaning your appliance at reg- group.com/store or from customer ular intervals. service. - Page 38 en Cleaning and servicing Phase Removal of Detergent Placement Grease and limescale Liquid machine care product Appliance interior, e.g. bottle or machine descaler in hung in the cutlery basket or powder form. powder in the interior. Food remnants and de- Machine cleaner Detergent dispenser posits To ensure optimum cleaning perform-...
-
Page 39: Filter System
Cleaning and servicing en Pull down the micro filter to re- Filter system move. The filter system removes coarse soiling from the dishwashing cycle. Press the locking catches gether and lift the coarse filter out . Micro filter Fine filter Coarse filter Cleaning filters Soiling in the dishwashing water may... -
Page 40: Cleaning Spray Arms
en Cleaning and servicing Cleaning spray arms Limescale and soiling in the dish- washing water may block the nozzles and bearings on the spray arms. Clean the spray arms regularly. Unscrew the upper spray arm and pull down to remove . Pull up the lower spray arm to re- move. -
Page 41: Troubleshooting
Troubleshooting en Troubleshooting Troubleshooting You can rectify minor faults on your appliance yourself. Read the troubleshoot- Troubleshooting ing information before contacting after-sales service. This will avoid unneces- sary costs. WARNING Risk of electric shock! Incorrect repairs are dangerous. Repairs to the appliance should only be carried out by trained specialist ▶... -
Page 42: Error Code / Fault Display / Signal
en Troubleshooting Fault Cause Troubleshooting Appliance door opens too Door is not correctly adjus- Adjust the appliance door as de- ▶ wide at the end of the pro- ted. scribed in the installation instruc- gramme. tions. The door gap must be at least 70 mm - 100 mm. - Page 43 Troubleshooting en Fault Cause Troubleshooting E:32-00 will light up altern- Remove the filter from the supply ately or indicator for water hose supply lights up. Clean the filter. Re-insert the filter in the supply hose. Screw the water connection back Check the water connection for leaks.
-
Page 44: Washing Results
en Troubleshooting Fault Cause Troubleshooting A different error code ap- A technical fault is present. Press . pears in the display window. Unplug the appliance or switch off the fuse. E:01-00 to E:90-10 Wait at least 2 minutes. Insert the mains plug of the appli- ance in a socket or switch on the fuse. - Page 45 Troubleshooting en Fault Cause Troubleshooting Tableware is not dry. Use a different combined detergent with a better drying performance. Extra Dry not activated to im- Activate Extra Dry. ▶ prove drying performance. Tableware removed too Wait until the programme ends. early or drying process not Only remove tableware 30 minutes yet ended.
- Page 46 en Troubleshooting Fault Cause Troubleshooting Remnants of food on table- Filters are soiled. Clean the filters. ▶ → "Cleaning filters", Page 39 ware. Filters are inserted incor- Insert the filters properly. → "Filter system", Page 39 rectly and/or not engaged. Engage the filters. Washing programme selec- Select a more intensive washing ▶...
- Page 47 Troubleshooting en Fault Cause Troubleshooting Water marks on plastic Due to laws of physics Select a more intensive pro- ▶ parts. droplet formation on plastic gramme. → "Programmes", Page 17 surfaces is unavoidable. After drying water marks are Position tableware at an angle. ▶...
- Page 48 en Troubleshooting Fault Cause Troubleshooting Tea residue or lipstick marks Too little detergent is being Use a suitable "Detergent " ▶ → Page 26 and follow the manufac- on tableware. used or is unsuitable. turer's instructions for the amount to be used. Tableware has been pre- Only remove large remnants of food ▶...
- Page 49 Troubleshooting en Fault Cause Troubleshooting Plastic parts are discol- Tableware has been pre- Only remove large remnants of food ▶ oured. cleaned too intensely. The and do not prerinse tableware. sensors chose a weaker pro- gramme. Stubborn soiling cannot be entirely removed. Removable streaks are Amount of rinse aid to be Set the rinse aid system to a lower...
-
Page 50: Home Connect Problem
en Troubleshooting Fault Cause Troubleshooting Rust spots on cutlery. Cutlery is not sufficiently Use rust-resistant tableware. ▶ rust-resistant. Knife blades are often more severely af- fected. Cutlery may also rust if Do not wash rusting items. ▶ washed together with rust- ing items. -
Page 51: Information On Display Panel
Troubleshooting en Information on display panel Fault Cause Troubleshooting Add "Special salt" → Page 24. Special salt refill indicator Insufficient special salt. ▶ lights up. Sensor does not detect spe- Do not use special salt tablets. ▶ cial salt tablets. Refill indicator for special Water softening system is Setting the water softening system ▶... -
Page 52: Mechanical Damage
en Troubleshooting Fault Cause Troubleshooting Appliance does not start. Mains cable is not inserted. Check whether the socket works. Check whether the mains cable is properly inserted in the socket and on the rear of the appliance. Appliance door is not closed Close the appliance door. -
Page 53: Noise
Troubleshooting en Noise Fault Cause Troubleshooting Filling valves making knock- Caused by the domestic in- Can only be remedied in the do- ▶ ing noises. stallation. No appliance fault mestic installation. present. Does not affect functioning of the appliance. Knocking or rattling noise. Spray arm is striking table- Arrange tableware so that the spray ▶... -
Page 54: Clean Wastewater Pump
en Transportation, storage and disposal Insert the pump cover and press Clean wastewater pump down . Large remnants of food or foreign bodies can block the waste water pump. As soon as the rinsing water no longer drains properly, the waste water pump must be cleaned. -
Page 55: Protect Appliance From Frost
Customer Service en Protect appliance from frost Disposing of old appliance If there is a risk of frost where the ap- Valuable raw materials can be re- pliance will be standing, e.g. in a holi- used by recycling. day home, empty the appliance com- pletely. -
Page 56: Product Number (E-Nr.), Produc- Tion Number (Fd) And Consecut- Ive Numbering (Z-Nr.)
en Technical specifications least 10 years from the date on from water damage, the appliance which your appliance was placed on must be connected to the power the market within the European Eco- supply. nomic Area. ¡ The liability guarantee is valid for the service life of the appliance. -
Page 57: Information Regarding Free And Open Source Software
(Please search on the product web- A detailed Declaration of Conformity site for your appliance model and ad- can be found online at www.siemens- ditional documents). Alternatively, home.bsh-group.com/uk/ among the you can request the relevant informa- additional documents on the product tion from ossrequest@bshg.com or... - Page 58 en Declaration of Conformity UK (NI) 5 GHz WLAN (Wi-Fi): For indoor use only. 5 GHz WLAN (Wi-Fi): For indoor use only.
- Page 60 Valid within Great Britain: Imported to Great Britain by BSH Home Appliances Ltd. Grand Union House Old Wolverton Road Wolverton, Milton Keynes MK12 5PT United Kingdom Manufactured by BSH Hausgeräte GmbH under the trademark licence of Siemens AG *9001452347* 9001452347 (010715) 650 V1...