Changing Shooting Function Settings - Canon POWERSHOT 1000 HS User Manual

If you change the date or time in the
time and date will automatically change.

Changing Shooting Function Settings

If you set the mode switch to 4, and the mode to G, you can change the
settings in the 4 tab (p. 47).
Before attempting to shoot using a function explained in this chapter in
modes other than G mode, check if the function is available in those
modes (pp. 166 – 169).
Switching the Focus Setting
The camera focuses on whatever it is aimed at even when the shutter button
is not pressed. However, you can set it so that the camera only focuses when
the shutter button is pressed halfway.
Turning Off the AF Assist Beam
The lamp will automatically light to assist focusing in low light conditions when
you press the shutter button halfway. You can turn off the lamp.
Changing Shooting Function Settings
setting (p. 20), your [
●
Choose [Continuous AF], then press the
qr buttons to choose [Off].
Since the camera focuses continuously
until you press the shutter button
On
halfway, it allows you to shoot without
missing photo opportunities.
The camera does not focus
Off continuously, thereby conserving
battery power.
●
Choose [AF-assist Beam], then press the
qr buttons to choose [Off].
Home]
147