Turning The Demo Function Off; Convenient Functions; Auto-Off Function; Setting The Time - Panasonic SC-AK100 Operating Instructions Manual

Mini system with new design and bright fl display
Table of Contents

Advertisement

Turning the demo function off

DEMO
A demonstration of the display is shown if you have not set the clock.
You can reduce the power consumed in standby mode by turning it
off.
During standby mode
Hold down [L/–DEMO] until "NO DEMO" is displayed.
Every time you hold down the button:
NO DEMO (off)
DEMO ON (on)
To show a demonstration of the display
L/–DEMO] until "DEMO ON" is displayed.
Hold down [
Note
DEMO function cannot be turned on when Dimmer is on.

Convenient functions

To dim the display panel
Remote control only
Press [DIMMER].
The display is dimmed and the indicator is turned off.
(The AC supply indicator remains on.)
Press [DIMMER] again to restore the display.
To mute the volume
Remote control only
Press [MUTING].
Press the button again to cancel.
"MUTING" goes out.
To cancel from the unit, turn [VOLUME] to minimum (--dB), then raise
it to the required level.
Muting is also cancelled when the unit is turned off.
12
RQT6351

Auto-off function

Remote control only
When CD or tape is selected as the source
To save power, the unit turns off if it is left unused for ten minutes.
This function does not work if the source is tuner or AUX.
Hold down [–AUTO OFF].
"AUTO OFF" is shown on the display.
The setting is maintained even if the unit is turned off.
If you select tuner or AUX as the source, "AUTO OFF" goes out. It
comes on again when you select disc or tape.
To cancel
Hold down [–AUTO OFF] again.

Setting the time

Remote control only
1
3
This is a 12-hour clock.
1
Switch on the power.
2
Press [CLOCK/TIMER] to select "CLOCK".
Every time you press the button:
CLOCK
PLAY
REC
Previous display
3
(within 7 seconds or so)
Press [g/REW/3] or [4/FF/f] to set the time.
4
Press [CLOCK/TIMER] to finish setting the time.
The display will return to whatever was displayed before you set
the time.
To display the time
Press [CLOCK/TIMER] once when the unit is on or at standby mode.
The time is shown for about 5 seconds.
Note
Reset the clock regularly to maintain accuracy.
SLEEP
–AUTO OFF
2 • 4

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sa-ak100Sb-ak100

Table of Contents