Video Compensation - Cablematic VGA CAT5 Extender User Manual

Video Compensation

(Receiver / Repeater Unit only)
 Group B EQ / Gain / Skew Adjustment on Receiver / Repeater Unit:
To optimize the video signal associated with various cable lengths, users may
adjust the video compensation via the jog wheel on the Receiver / Repeater
Unit.
Users can adjust the selected signal status (Equalization / Gain / BGR Skew) by
turning the jog wheel clockwise / counterclockwise. For example, tune the jog
wheel in counterclockwise direction as the diagram shown below to decline the
selected signal status, and vice versa.
NOTE: Exit the mode through either one of the operation below.
 Leave the Unit idle (no activity) for 20 seconds.
 Press and Hold the jog wheel for two seconds.
19