Preset Tuning; Presetting Stations/Listening To Preset Stations; Reducing Excessive Noise - Panasonic SA-XR57K Operating Instructions Manual

Preset tuning

Presetting stations
Auto presetting
n
1
Set the channel reception to FM 87.9 MHz or
AM 530 kHz. (ápage 34)
Preset channels that are automatically assigned by this unit are:
FM: 1 to 30
AM: 21 to 30
Preset the FM stations first. If the AM stations are preset before the
FM stations, they will be erased when the FM stations are preset.
2
Enter the menu.
MENU
Press SETUP
RETURN
3
Select "TUNER " and confirm the setting.
4
Select "AUTO MEMO " and confirm the setting.
5
Select "START " and press [ENTER].
Select "CANCEL " to cancel.
• During automatic presetting, the memory indicator (
and the frequency scrolls. The memory indicator and channel
numbers are displayed for a second when a station is preset.
• The last station to be preset is displayed when presetting finishes.
• Frequencies may not be preset correctly when broadcast waves are
too strong or too weak. In such cases, carry out presetting manually.
• Even if the AC power supply cord is disconnected from the household AC outlet, the stations remain in the memory for approximately
two weeks.
Listening to preset stations
On the remote control
n
• Select the channel.
• Press the numbered buttons to select the channel.
To select a two digit number
e.g. 21: [ ≧ 10, ENTER] → [2] → [1]
Reducing excessive noise (on the main unit)
Select if noise is excessive during radio reception.
During FM stereo reception
n
You can improve FM reception by switching reception to monaural.
1
Select "TUNER " and confirm the setting.
2
Select "FM MODE " and confirm the setting.
3
Select "MONO " and confirm the setting.
• When this is set, "MONO" appears on the display.
• Select "AUTO " to cancel.
4
Press [-MENU, –SETUP, RETURN] 2 times to
select "EXIT " and press [ENTER].
) flashes
M
CH
0
ENTER
Manual presetting
n
1
Tune to the station you want to preset.
(ápage 34)
2
Enter the menu.
MENU
SETUP
Press
RETURN
3
Select "TUNER " and confirm the setting.
4
Select "MEMORY " and confirm the setting.
5
Select a channel number and press [ENTER].
"STORED " is displayed.
• To continue presetting, press [TUNE 2 or 1] to tune
another station from step 1.
6
Press [-MENU, –SETUP, RETURN] 2 times to
select "EXIT " and press [ENTER].
• FM stations can also be preset in the MONO mode
(á below).
On the main unit
n
1
Enter the menu.
MENU
SETUP
Press
RETURN
2
Select "TUNER " and confirm the setting.
3
Select "TUNE MODE " and confirm the setting.
4
Select "PRESET " and confirm the setting.
5
Press [-MENU, –SETUP, RETURN] 2 times to
select "EXIT " and press [ENTER].
6
Select the channel.
TUNE
Press
• Hold down the button to change channels faster.
Select "MANUAL " in step 4 when you wish to perform manual tuning (á page 34).
Preparation: Press [-MENU, –SETUP, RETURN] to enter the menu.
During AM reception
n
When there is a lot of noise interference with an AM broadcast,
try switching to this mode.
1
Select "TUNER " and confirm the setting.
2
Select "BEAT PROOF " and confirm the setting.
3
Select "MODE 1 " or "MODE 2 " and confirm
the setting.
4
Press [-MENU, –SETUP, RETURN] 2 times to
select "EXIT " and press [ENTER].
35
RQT8549