Table of Contents
Advertisement
Picture incorrect
≥ Ensure that the unit is not connected through a video cassette recorder. (6)
Picture distorted.
≥ Have you selected an item in "Video Output Mode" (➜ page
17, Picture Menu) that is incompatible with the connected
equipment? Depending on the current connection status,
perform corresponding steps.
―When connecting to a television that is incompatible with
progressive output using the COMPONENT VIDEO
OUTPUT terminal:
Press and hold [CANCEL] until the picture displays
correctly. The settings will return to "480i".
―When connecting to a television with an HDMI cable:
Press and hold [CANCEL] until the picture displays
correctly. The settings will return to "480p".
―When connecting to an amplifier with an HDMI cable, and
to a television that is incompatible with progressive output
using the COMPONENT VIDEO OUTPUT terminal:
1.Disconnect the HDMI (remove the cable/switch off the
amplifier).
2.Press and hold [CANCEL] until the picture displays
correctly. The settings will return to "480i".
3.Set "Video Output" to "Off" in the "HDMI" tab. (20)
4.Connect the HDMI (connect the cable/switch on the
amplifier).
≥ Change "TV Aspect" in "Video" tab. (19)
Picture size
≥ Use the television to change the aspect. If your television
doesn't fit the
screen.
does not have that function, change "4:3 Aspect" in Display
Menu. (18)
≥ Change the Zoom setting. (13)
≥PAL discs cannot be played. (You can play DVD-Audio;
The television may
display incorrectly
however, still pictures may be displayed enlarged.)
≥Connect to a progressive output compatible television to enjoy
or colors appear
faded.
progressive video.
≥Picture may not be seen when more than 4 devices are
connected with HDMI cables. Reduce the number of
connected devices.
≥ Restore the zoom ratio to a1.00. (13)
Menu not displayed
≥ Set "Subtitle Position" in Display Menu to "0". (18)
correctly.
≥ Set "4:3 Aspect" in Display Menu to "Normal". (18)
≥ Turn off TV's zoom function.
Auto zoom
≥ Use the other preset aspect ratios or manual adjustment. (13)
function does not
≥ Zoom function may not work well, especially in dark scenes
work well.
and may not work depending on the type of disc.
≥ Change the HDMI video output settings by using either of
Video is not
output from HDMI
the procedures below.
AV OUT.
– Connect the television using VIDEO OUT or S VIDEO OUT
terminal, then set "Video Output" to "On" in the "HDMI" tab. (20)
– Press and hold [CANCEL] until the picture is displayed.
The settings will change to "On".
Progressive video
≥ This problem is caused by the editing method or material
There is ghosting
used on DVD-Video, but should be corrected if you use
when progressive
interlace output. Change "Video Output Mode" in Picture
output is on.
Menu to "480i". (17)
When connecting with HDMI AV OUT terminal, connect with
the other terminals and change the settings in the following
order:
1. Select "Video Output"("HDMI" tab) to "Off". (20)
2. Select "Video Output Mode"(Picture Menu) to "480i". (17)
≥ If the unit is connected to the television through VIDEO OUT
Pictures not in
progressive output.
or S VIDEO OUT, output will be interlace.
≥ When progressive output or HDMI output is on, closed
Closed captions
not displayed.
captions will not be displayed.
Sound incorrect
≥ Select "Off" in "Advanced Surround". (12)
Sound distorted.
≥ Set "Attenuator" in Audio Menu to "On" if it causes distortion
with AUDIO OUT connections. (18)
≥ Noise may occur when playing WMA files.
≥The disc may have restrictions on the method of audio
output. With some multi-channel discs, unless the number of
connected speakers is the same as the disc's channel
specification, audio will not be output properly. Refer to the
disc's jacket for more information. [DVD-A]
≥With HDMI AV OUT connections, audio may not be output
from other terminals in the way that was set.
≥Match the speaker settings with the connected equipment. (20)
≥ If you have connected a digital amplifier which does not
Piercing noise
comes from the
include decoder, be sure to select "PCM" in "Dolby Digital" or
"DTS Digital Surround" in "Audio" tab. (20)
speakers.
≥ None of the audio effects work when the unit is outputting
Effects do not
bitstream signals from the DIGITAL AUDIO OUT or HDMI AV
work.
OUT terminal. (8)
≥ Some audio effects do not work or have less effect with
some discs.
≥Night Sound Mode, H.Bass, Advanced Surround, Multi Re-
master and Sound Enhancement do not work if you have
changed the play speed.
≥ With HDMI AV OUT connections, HDCD discs are played as
normal CDs.
≥ There may be a pause in sound when you change the play
No sound
speed.
≥Audio may not be heard when more than 4 devices are
connected with HDMI cables. Reduce the number of
connected devices.
23
Advertisement
Table of Contents
