Step 2 The Remote Control; Step 3 Quick Setup - Panasonic DVD-S54S Operating Instructions Manual

Enjoying surround sound

Amplifier with a built-in decoder or a
decoder-amplifier combination
• You cannot use DTS Digital Surround
decoders incompatible with DVD.
Set "AUDIO OUT" to "OFF"
( page 19, "HDMI" menu), and change
"PCM OUTPUT", "DOLBY DIGITAL" and
"DTS" ( page 19, "AUDIO" menu).

STEP 2 The remote control

Batteries

R6/LR6, AA

STEP 3 QUICK SETUP

Turn on the television and select the appropriate video input on the television.
1
Power on
To change these settings later, select "QUICK SETUP" ( page 19, "OTHERS" menu).
COAXIAL IN
Coaxial cable
Back of the unit
• Insert so the poles (4 and 3) match those in the remote
control.
• Do not use rechargeable type batteries.
• Do not heat or expose to flame.
• Do not leave the batteries in an automobile exposed to
direct sunlight for a long period of time with doors and
windows closed.
Do not:
• mix old and new batteries.
• use different types at the same time.
• take apart or short circuit.
2 3
Shows QUICK
Follow the message and
SETUP screen.
make the settings.
Connect the AC power supply cord last

AC power supply cord (included)
To household AC outlet
Conserving power
This unit consumes a small amount of power, even when it is turned off (1 W). To save
power when the unit is not to be used for a long time, unplug it from the household AC
outlet.
• attempt to recharge alkaline or manganese batteries.
• use batteries if the covering has been peeled off.
Mishandling of batteries can cause electrolyte leakage which
can damage items the fluid contacts and may cause a fire.
Remove batteries if the remote control is not going to be used
for a long period of time. Store in a cool, dark place.
 Use
Aim at the remote control sensor ( page 10), avoiding
obstacles, at a maximum range of 7 m (23 feet) directly in front
of the unit.
4
Select
OK
Register
Press to finish
QUICK SETUP.
AC IN
5
OK
Press to exit.
9 9