Viewing Pictures From Connected Equipment - Sony Bravia KDL-26S2030 Operating Instructions Manual

Viewing pictures from
connected equipment
Switch on the connected equipment, then
perform one of the following operation.
For equipment connected to the scart sockets using a
fully-wired 21-pin scart lead
Start playback on the connected equipment.
The picture from the connected equipment appears on
the screen.
For an auto-tuned VCR (page 6)
In analogue mode, press PROG +/-, or the number
buttons, to select the video channel.
For other connected equipment
Press / repeatedly until the correct input
symbol (see below) appears on the screen.
AV1/ AV1,
Audio/video or RGB input signal through the scart
socket / 1 or 2.
source has been connected.
AV3:
Component input signal through the Y, P
sockets / 3, and audio input signal through the
L, R sockets / 3.
AV4:
Digital audio/video signal is input through the HDMI IN
4 socket. Audio input signal is analogue only if the
equipment has been connected using the DVI and audio
out socket.
AV5/ AV5:
Video input signal through the video socket
audio input signal through the L (MONO), R audio
sockets 5. appears only if the equipment is
connected to the S video socket
video socket 5, and S video input signal is input
through the S video socket
Additional operations
To Do this
Return to the normal Press DIGITAL or ANALOG.
TV operation
Access the Input Press
signal index table index table. (Then, only in
analogue mode, press
select an input source, press
then press
18
GB
AV2/ AV2:
appears only if an RGB
/C , P /C
B B R
5, and
5 instead of the
5.
to access the Input signal
g
.) To
F
.
Using the Tools menu
Press TOOLS to display the following options when
viewing pictures from connected equipment other
than PC.
Options
Power Saving
Picture Mode
Sound Mode
Auto Clock Set (in
analogue mode only)
Sleep Timer
i Volume
R
f
/ ,
Description
See page 26.
See page 20.
See page 22.
Allows you to switch to digital
mode and obtain the time.
See page 25.
See page 23.