Step 4: Ac Power Supply Cord Connection; Preparing The Wireless System - Panasonic SC-BT235 Operating Instructions Manual

STEP 4: AC power supply cord connection

Connect only after all other connections are complete.
(For units with PX printed on the packaging)
Before connecting the AC power supply cord;
Set the voltage
≥Use a flat-head screwdriver to move the voltage
selector to the appropriate position for the area
in which this system is used.
Main unit
AC IN
A AC power supply cord (included)
(For units with PX printed on the packaging)
≥If the power plug does not fit your AC outlet,
use the AC plug adaptor (included). If it still doesn't fit,
contact an electrical parts distributor for assistance.
[BT730]
≥AC power supply cord with a label is for the wireless
system. Do not use any other AC power supply cords
except the supplied one.
Main unit
≥This unit consumes a small amount of AC power, even when it is turned off.
For the U.S.A. and Canada [BT730] [BT330]: approx. 0.05 W* [BT230] [BT235]: approx. 0.1 W*
For units with PX printed on the packaging [BT730] : approx. 0.1 W* [BT230]: approx. 0.2 W*
*When the "Quick Start" setting is "Off"
In the interest of power conservation, if you will not be using this unit for a long time, unplug it from the household AC outlet.
Wireless system [BT730]
For the U.S.A. and Canada: approx. 0.2 W
For units with PX printed on the packaging: approx. 0.3 W
The socket outlet shall be installed near the equipment and easily accessible. The mains plug of the power supply cord shall
remain readily operable. To completely disconnect this apparatus from the AC Mains, disconnect the power supply cord plug
from AC receptacle.
STEP 5:
Turn on the wireless system after all connections are complete.
Wireless system
VQT2M13
18
.
The main unit shows SC-BT730 for the U.S.A.
and Canada.

Preparing the wireless system

[BT730]
Press [
Unit on/off button [POWER C I, B Í]
C I:
B Í:
POWER
WIRELESS LINK
WIRELESS LINK indicator
Red:
Green : The wireless system is on and the wireless link is activated.
[BT730]
Wireless system
VOLT ADJ
110 127V 220 240V
B To a household AC outlet
C I, B Í] on the wireless system.
POWER
The wireless system is on.
The wireless system is off.
The wireless system is on and the wireless link is deactivated.
(" [W] " is also displayed on the main unit's display.)
AC IN