Firmware Updates - Panasonic SC-BT235 Operating Instructions Manual

1. LAN cable connection or
Connection to access point
2. IP address setting
3. Connection to gateway
1. LAN cable connection or
Connection to access point
2. IP address setting
3. Connection to gateway
Network Easy Setting (Internet Connection Check)
Network Easy Setting (Internet Connection Check)
Complete.
- Connection to the Internet : Fail(Error code: B019)
Failed the connection test.
Cannot find the server.(Error code: B019)
Please refer to the operating instructions for the cause
of the error and the solution for it.
Press [OK].
OK
Display
≥ "Primary DNS" and "Secondary
Cannot find the server.
(Error code: B019)
≥ The server may be busy or the
Failed to connect to
the server.
(Error code: B020)
≥ Settings of "Proxy Server
≥ Refer to the operating instructions of the hub or router.
≥ You can perform this setup anytime by selecting "Network Easy Setting" in
the Setup menu. ( 38)
≥ You can redo these settings individually using "Network". (
[BT730] [BT330] [BT230]
≥
Do not use this device to connect to any
wireless network for which you do not have usage rights.
During automatic seaches in a wireless network environment, wireless
networks (SSID*) for which you do not have usage rights may be
displayed; however, using these networks may be regarded as illegal
access.
[BT730] [BT330] [BT230]
≥
After performing network settings on this unit,
the settings (encryption level, etc.) of the Wireless router (Access point)
might change. When you have trouble getting online on your PC, perform
the network settings on your PC in accordance with the settings of
Wireless router (Access point).
* An SSID (Service set IDentification) is a name used by wireless LAN to
identify a particular network. Transmission is possible if the SSID matches
for both devices.
≥ Connection
:Pass
and settings
of the hub
:Fail
and router
≥ Settings of
:Fail
"IP Address /
:Pass
DNS
Settings"
:Pass ( 38)
:Fail
Check the following
DNS" Settings of "IP Address /
DNS Settings" ( 38)
service may have been
suspended. Please wait a few
moments, and then try again.
Settings" ( 38) and the router.
38)

Firmware updates

Occasionally, Panasonic may release updated firmware for this
unit that may add or improve the way a feature operates.
These updates are available free of charge.
This unit is capable of checking the firmware automatically
when connected to the Internet via a broadband connection.
When a new firmware version is available, the following screen
is displayed.
Firmware Update
Latest Online Version: x.xx
Current Installed Version: x.xx
Do you want to start firmware update?
For the update information, please visit the
following website:
http://panasonic.net/support/
Yes No
OK
RETURN
If downloading on this unit fails or this unit is not connected to
the Internet, then you can download the latest firmware from
the following website and burn it to a CD-R to update the
firmware.
http://panasonic.net/support/
(This site is in English only.)
To show the firmware version on this unit. (
Information")
DO NOT DISCONNECT the unit from the AC power or perform
any operation while the update takes place.
After the firmware is installed, "FINISH" will be displayed on the
unit's display. Unit will restart and the following screen will be
displayed.
The firmware was updated.
Current Installed Version
≥ You can perform update anytime by selecting "Firmware Update" in the
Setup menu. ( 38)
≥ Downloading will require several minutes. It may take longer or the Internet
may not be connected depending on the connection environment.
≥ If you do not want to check for the latest firmware version, set "Automatic
Update Check" to "Off". ( 38)
38, "System
: x.xx
OK
RETURN
VQT2M13
21