Ac Power Supply Cord Connection; Bluetooth ® Connection - Panasonic SC-HTB70 Owner's Manual

AC power supply cord connection

≥ Connect only after all other connections are completed.
AC IN
≥This system consumes a small amount of AC power (
power conservation, if you will not be using this system for a long time, unplug it from the household
AC outlet.
Saving energy
The main unit is designed to conserve its power consumption and save energy.
The main unit will automatically switch to standby mode
≥
no signal is input and no operation is performed for approx. 30 minutes.
Bluetooth
®
By using the Bluetooth
to the sound from the Bluetooth
from this system wirelessly.
Preparation
≥ Turn on the Bluetooth
place the device near the main unit.
Bluetooth
®
Press [ ] to select " ".
≥ If the " " indicator flashes quickly, go to step 3.
Press and hold [ ] until the " "
indicator flashes quickly.
≥ If the " " indicator flashes slowly, repeat step 2.
Select "SC-HTB70" or "SC-HTB65"
from the Bluetooth
Bluetooth menu.
®
≥ If prompted for the passkey on the Bluetooth
"0000".
≥ Once the Bluetooth device is connected, the "
®
stops flashing and lights up.
You can register up to 8 devices with this system. If a 9th
device is paired, the device that has not been used for the
longest time will be replaced.
connection
connection, you can listen
®
audio device
®
feature of the device and
®
pairing
device's
®
device, enter
®
" indicator


25) even when it is turned off. In the interest of
Connecting a Bluetooth
device
Press [ ] to select " ".
≥ If the " " indicator lights, a Bluetooth
connected with this system. Disconnect it. (
Select "SC-HTB70" or "SC-HTB65"
from the Bluetooth
Bluetooth
∫ Disconnecting a Bluetooth
Press and hold [
slowly.
≥ When " " is selected as the source, this system will
automatically try and connect to the last connected
Bluetooth device.
®
≥ The Bluetooth device will be disconnected if a different
®
audio source (e.g. "TV") is selected.
≥ Refer to the operating instructions of the Bluetooth
for further instruction on how to connect a Bluetooth
device.
≥ This system can only be connected to one device at a time.
≥ To change the sound quality, refer to "Bluetooth
communication mode" on page 20.
A To a household AC
outlet
B AC power supply
cord (supplied)
device is already
®
below)
device's
®
menu.
®
device
®
] until the " " indicator flashes
RQT9763
when
®
device
®
®
®
17