Panasonic SC-PT480 Operating Instructions Manual page 13

SUBTITLE
[DVD-V] (with multiple subtitles) [VCD] (SVCD only)
To select subtitle language
≥ On iR/iRW, a subtitle number may be shown for subtitles that are
not displayed.
[DVD-VR] (with subtitle on/off information)
To select "ON" or "OFF"
≥ This may not work depending on the disc.
ANGLE
[DVD-V] (with multiple angles)
To select a video angle
DATE DISPLAY
JP G
DAT E
[JPEG] To select "ON" or "OFF" for picture's date display
ROTATION
[JPEG] To rotate a picture (during pause)
0,------. 90,------.180,------.270
^--------------------------------------------J
Menu 2 (Video)
PICTURE MODE
NORMAL
CINEMA1: Mellows images and enhances detail in dark scenes.
CINEMA2: Sharpens images and enhances detail in dark scenes.
DYNAMIC: Enhances the contrast for powerful images.
ANIMATION: Suitable for animation.
ZOOM
To select zoom sizes
NORMAL, AUTO ([DVD-VR] [DVD-V] [VCD]), k2, k4
≥ [JPEG]: during pause
TRANSFER MODE
If you have chosen "480p"/"720p"/"1080p" or "1080i" ["VIDEO FORMAT"
in Menu 4 (HDMI)] select the method of conversion for progressive
output to suit the type of material.
≥ The setting will return to "AUTO1" when the disc tray is opened, the
unit is turned off or another source is selected.
AUTO1: Automatically detects the film and video content, and
appropriately converts it.
AUTO2: In addition to "AUTO1", automatically detects film
contents with different frame rates and appropriately
converts it.
VIDEO: Select if the video content is distorted when using
"AUTO1" or "AUTO2".
Menu 3 (Audio)
DIALOGUE ENHANCER
To make the dialogue in movies easier to hear
[DVD-V] (Dolby Digital, DTS, 3-channel or higher, with the dialogue
recorded in the center channel)
OFF, ON
Menu 4 (HDMI)
HDMI STATUS
HDMI
To show HDMI information
e.g. [DVD-V]
CONNECTED STATE
AUDIO STREAM
MAX CHANNEL
VIDEO FORMAT
COLOR SPACE
1 Connection status
2 Shows the output signal type.
(When "OFF" is selected in "AUDIO OUT" (
"– – –" will be displayed.)
3 Shows the number of audio channels.
4 ( below, VIDEO FORMAT)
5 ( below, COLOR SPACE)
HD ENHANCER
This works when the HDMI connection is being used with "VIDEO
PRIORITY" ( 17, HDMI menu) set to "ON".
To sharpen the "720p", "1080i" and "1080p" picture quality
OFF, 1 (weakest) to 3 (strongest)
VIDEO FORMAT
This works when the HDMI connection is being used with "VIDEO
PRIORITY" ( 17, HDMI menu) set to "ON".
To select suitable picture quality with your TV
(Video recordings will be converted to, and output as, high-definition
video.)
480p/720p/1080p (progressive)
480i/1080i (interlaced)
≥ If the picture is distorted, press and hold [CANCEL]4 until the picture
is displayed correctly. (The output will return to "480p".)
COLOR SPACE
This works when the HDMI connection is being used with "VIDEO
PRIORITY" ( 17, HDMI menu) set to "ON".
To select suitable picture color with your TV
YCbCr 4:2:2
§
– Luminance and color details are sent separately. Most of the picture
details are in luminance. The color rate is much higher than
composite video. Compatible with all TV models.
YCbCr 4:4:4
§
– All color details are sent. Luminance and color details are in the
same signal.
RGB
§
– Component video type of signal.
§ Terms are descriptions of the sample formats used in digital video.
YCbCr is a video signal for luminance (Y), blue (Cb) and red (Cr)
details.
*
≥ An " " mark will appear if compatible with your TV.
≥ If the picture color is distorted, press and hold [CANCEL]4 until the
picture color is displayed correctly.
HDMI − INFORMATION
CONNECTED
PCM
2ch
720p
YCbCr 4 : 4 : 4
17, HDMI menu),
13