Projector Administration Settings - Management Menu - Epson EB-735Fi User Manual

Projector Administration Settings - Management Menu

Settings on the Management menu let you customize various projector
administrative features.
Setting Options
User Button Various menu
options available
User's Logo Start Setting
Reset
User Pattern —
Description
Assigns a menu option to the [User]
button on the remote control for one-
touch access.
Creates a screen that the projector
displays to identify itself and enhance
security.
Captures a projected screen and saves it
as a pattern for display. Select Pattern
Display on the Display menu to display
the saved pattern.
Setting Options
Control Panel Lock Full Lock
Except for Power
Off
Color Uniformity Color Uniformity
Adjustment Level
Start Adjustments
Reset
Refresh Mode Timer
Messages
Start
Light Source Run Now
Calibration
Run Periodically
Last Run
226
Description
Controls projector button locking to
secure the projector:
• Full Lock: locks all buttons.
• Except for Power: locks all buttons
except the power button.
• Off: no buttons locked.
Set to On to adjust the color tone balance
for the whole screen.
Sets the adjustment level.
Adjusts the red, green, and blue color
tones individually for the selected area.
Resets all adjustment values on the Color
Uniformity menu to their default
settings.
Sets a time period during which the
projector displays the refresh image.
Set to On to display a message informing
you that the projector is in refresh mode.
Starts the refresh mode process to clear
any projected afterimage and turn off the
projector after a specified period of time.
Press any button on the remote control
to cancel this process.
Starts light source calibration to optimize
the color balance of the currently
projected image. You may not be able to
start calibration if the projector's
environmental temperature is out of
range. (Wait 30 minutes after turning on
the projector before starting calibration
for the best results.)
Set to On to perform light source
calibration periodically every 100 hours
of usage.
Displays the date and time of the last
light source calibration.