Console And Debug Port - Cartft FLEETPC-ARM-300 Series Reference Manual

3.3

Console and Debug Port

The console port (or debug port) is located inside FLEETPC-ARM-300 box (CN21 of
FleetPC-ARM-100 PCBA). Follow steps below to setup console port:
 Find CN21 console port connector on VPC100 PCB.
 Make sure you have C220 debug board and cable. Note that C220 board is not part of
the FLEETPC-ARM-300 product. It has to be purchased separately.
 Connect C220 debug board cable to FLEETPC-ARM-300 PCB CN21.
 Connect the RS232 IDC cable to C220 debug board 2x4 box header (black connector):
All manuals and user guides at all-guides.com
Page 19
FLEETPC-ARM-300 Series
Pin1 Pin5
CN21 Connector / Schematic