Harbor Freight Tools MADDOX 1721C-B Owner's Manual & Safety Instructions

Flaring tool kit

Download this manual

Owner's Manual & Safety Instructions

Save This Manual

operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the

back of the manual near the assembly diagram (or month and year of purchase if product has no number).

Keep this manual and the receipt in a safe and dry place for future reference.

Email our technical support at: productsupport@harborfreight.com

When unpacking, make sure that the product is intact

and undamaged. If any parts are missing or broken,

please call 1-888-866-5797 as soon as possible.

2021 by Harbor Freight Tools

No portion of this manual or any artwork contained herein may be reproduced in

any shape or form without the express written consent of Harbor Freight Tools.

Diagrams within this manual may not be drawn proportionally. Due to continuing

improvements, actual product may differ slightly from the product described herein.

Tools required for assembly and service may not be included.

Keep this manual for the safety warnings and precautions, assembly,

Flaring Tool Kit

Double Flaring Instructions:

Visit our website at: http://www.harborfreight.com

Bubble Flaring Instructions:

NOTICE:

WARNING

Read this material before using this product.

Failure to do so can result in serious injury.

SAVE THIS MANUAL.

21e

58147

Need help?

Do you have a question about the MADDOX 1721C-B and is the answer not in the manual?

Page 1 No portion of this manual or any artwork contained herein may be reproduced in Failure to do so can result in serious injury. any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing SAVE THIS MANUAL.
Page 2 4. Keep bystanders out of the area If unreadable or missing, contact during assembly or use. Harbor Freight Tools for a replacement. 5. Do not assemble or use when tired or when 10. The quality of flares produced by this tool is under the influence of drugs or medication.
Page 3 Bubble Flaring 1. This tool is used to create a bubble flared end on 6. Position Yoke over Flaring Bar so Copper, Aluminum, Soft Steel, and Brass tubing. stem of adapter enters tubing. 2. Straighten tubing as much as possible, and then 7.
Page 4 OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.