Factory Mode Adjustments - Samsung UE32B6000VW Service Manual

4-3. Factory Mode Adjustments

4-3-1 Entering Factory Mode
To enter 'Service Mode' Press the remote -control keys in this sequence :
- If you do not have Factory remote - control
Power OFF
4-3-2 How to Access Service Mode
Using the Customer Remote
1. Turn the power off and set to stand-by mode
2. Press the remote buttons in this order; POWER OFF - INFO - MENU - MUTE - POWER ON to turn the set on.
3. The set turns on and enters service mode. This may take approximately 20 seconds.
4. Press the Power button to exit and store data in memory.
- If you fail to enter service mode, repeat steps 1 and 2 above.
5. Initial SERVICE MODE DISPLAY State
Mode: CDTV . RES : 480I
Option
ADC/WB
Control
Expert
Advanced
6. Buttons operations withn Service Mode
Menu
Direction Keys /
Direction Keys /
Source
INFO MENU
T-CHU7DEUC-0044
T-CHU7DEUS-0033
SDAL-4.2.34-0102
RFSl12_2G_64_512-13 T-CHU7DEUC
2008-12-22
FRCQ FW : 04D4, CONFIG : 4800
TYPE : 40A1UF0E
Model: UE46B7000
EDID OK
CALIV : AV O COMP O PC 0 HDMO O
Option : 7532 0110
Factory Data Ver : 202
DTP-AP-COMP-084
DTP-HIIG-0076
TLIB US3 2G 2008-12-12-01
DTP-BP-0087
Date of purchase : XX/XX/2009
Full Menu Display/Move to Parent Menu
Item Selection by Moving the Cursor
Data Increase / Decrease for the Selected Item
Cycles through the active input source that are connected to the unit
MUTE Power On
4. Troubleshooting
4-27