Sedus black dot Instructions For Use Manual page 8

The functions of the swivel chair
A Height of the seat
Lowering the seat: Sit down on the seat
P
1.
lever upwards (the seat will drop slowly)
the lever at the desired height will lock the position
Raising the seat: Stand up
P
1.
upwards (the seat will rise slowly)
lever at the desired height will lock the position
B Angle of the backrest
Adjusting the backrest dynamically:
P
upwards and release it
2.
The backrest is automatically released
3.
Locking the backrest into position:
P
the backrest reaches the desired angle
down and release it to lock the backrest into position
C Height of the lumbar support
(optional)
Adjusting the height:
P
backrest Sliding lumbar adjustment
2.
Lumbar depth (optional on black dot net): Turn inlay
P
to increase or decrease support
D Strength of the backrest pressure
Increasing the backrest pressure:
P
handle Crank the handle clockwise (forwards)
2.
Push the handle back in
3.
Reducing the backrest pressure:
P
handle Crank the handle anticlockwise (backwards)
2.
Push the handle back in
3.
8 English
Pull the
2.
Releasing
3.
Pull the lever
2.
Releasing the
3.
Pull the lever
1.
Lean against the backrest
Lean back until
1.
Press the lever
2.
Do not lean against the
1.
Pull out the
1.
Pull out the
1.
E Adjusting the seat tilt (optional)
To tilt the seat forwards:
P
seat Pull the lever out, hold it and swivel it anti-
2.
clockwise until the seat is tilted to the angle you require.
Then release the lever = lock in position
To return the seat to horizontal:
P
the seat Pull the lever out, hold it and swivel it clock-
2.
wise; the seat will return to its normal horizontal position
B
Take your weight off the
1.
Take your weight off
1.
I
H C
E