Sony KDL-26L4000 Operating Instructions Manual page 64

HDMI Set-up
Sound Offset
Manual
Programme
Preset
(Only in
analogue mode)
28
GB
Allows the TV to communicate with equipment that is compatible with the control
for HDMI function, and connected to the HDMI sockets of the TV. Note that
communication settings must also be made on the connected equipment.
"Control for HDMI": Sets whether or not to link the operations of the TV and the
connected equipment that is compatible with control for HDMI.
"Auto Devices Off": When this is set to "On", the connected equipment that is
compatible with control for HDMI turns off when you switch the TV to standby
mode using the remote.
"Auto TV On": When this is set to "On", the TV turns on when you turn on the
connected equipment that is compatible with control for HDMI.
"Device List Update": Creates or updates the "HDMI Device List". Up to 11
compatible equipment items can be connected, and up to 5 equipment items can be
connected to a single socket. Be sure to update the "HDMI Device List" when you
change the connections or settings.
"HDMI Device List": Displays a list of connected equipment that is compatible
with control for HDMI.
Sets an independent volume level to each equipment connected to the TV.
Changes the available analogue channel setting.
F f
Press / to select the programme number you want to modify. Then, press
System
Presets programme channels manually.
F f
1
Press / to select "System", then press
F f
2
Press / to select one of the following TV broadcast systems, then
G
press .
B/G: For western European countries/regions
D/K: For eastern European countries/regions
L: For France
I: For the United Kingdom
~
Depending on the country/region selected for "Country" (page 6), this option may not be
available.
Channel
F f
1 Press / to select "Channel", then press
F f
2 Press / to select "S" (for cable channels) or "C" (for terrestrial
channels), then press
3
Tune the channels as follows:
If you do not know the channel number (frequency)
F f
Press / to search for the next available channel. When a channel has been found,
the search will stop. To continue searching, press
If you know the channel number (frequency)
Press the number buttons to enter the channel number of the broadcast you want or
your VCR channel number.
4
Press to jump to "Confirm", then press
Repeat the procedure above to preset other channels manually.
Label
Assigns a name of your choice, up to five letters or numbers, to the selected channel.
AFT
Allows you to fine-tune the selected programme number manually if you feel that a
slight tuning adjustment will improve the picture quality.
g
.
F
.
.
f
/ .
.
.