Advertisement
Advertisement
Table of Contents
Related Manuals for anko LD-6337
Summary of Contents for anko LD-6337
- Page 1 Facial Steamer User Manual Model no.: LD-6337...
- Page 2 • IMPORTANT SAFETY INSTRUCTIONS Ensure before each use that the supply cord or any other parts are not damaged. • Keep the steamer and its cord out of reach of Read this user manual carefully before first use and children when connected to mains power or cooling save it for future reference.
- Page 3 • • IMPORTANT! to avoid damage to the appliance IMPORTANT! Unplug the appliance from mains do not operate the appliance when it runs out of power when filling with water and cleaning. water. • The facial steamer should be cleaned after each •...
- Page 4 PARTS Nozzle Water reservoir Steam Outlet Water tank Power switch Water tank cap FILLING THE WATER TANK To prevent scale build-up always empty the water tank after use. Rinse the water tank to remove any deposits. ⚫ Ensure that the steamer is cold and not connected to mains power. Remove the water tank from unit base.
- Page 5 USING THE FACIAL STEAMER Plug the unit in to a 220-240V AC electric power outlet. Press the Power Switch once to turn ON the unit. Wait for around 40sec, and steam will start to release. NOTE: A little bit of hot water may be ejected when the unit starts emitting steam. This is normal. Direct the steam to your face by keeping a distance of at least 20cm away from the nozzle.
- Page 6 Descaling If de-mineralized or distilled water was not used for operation, we recommend you follow below descaling procedure monthly. 1. Remove the water tank from the main body. 2. Fill the water tank with 50% white vinegar and 50% water. 50ml of this solution will be enough. TIP: Mix the solution in a separate container and then pour it into the water tank.
Need help?
Do you have a question about the LD-6337 and is the answer not in the manual?
Questions and answers